TM3B226M6R3LBA

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	High Reliability
Manufacturer Size Code:	B
Lead Spacing:	--
Height - Seated (Max):	0.083" (2.10mm)
Size / Dimension:	0.138" L x 0.110" W (3.50mm x 2.80mm)
Package / Case:	1411 (3528 Metric)
Mounting Type:	Surface Mount
Lifetime @ Temp.:	--
Series:	TANTAMOUNT®, TM3
ESR (Equivalent Series Resistance):	2 Ohm
Type:	Molded
Voltage - Rated:	6.3V
Tolerance:	±20%
Capacitance:	22µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Tantalum capacitors are one of the most widely used types of capacitors in electronics due to their relatively high dielectric strength and small size. The TM3B226M6R3LBA is a type of tantalum capacitor that is widely used due to its low equivalent series resistance (ESR) and high frequency operation. In this article, we will discuss the application fields and working principles of the TM3B226M6R3LBA.

Applicationfields
The TM3B226M6R3LBA is typically used in switch mode power supplies (SMPS) due to its low ESR and high frequency operation. It is also commonly used as a filter capacitor in DC-DC converter circuits, noise suppression circuits and transient voltage protection circuits. Additionally, it can be used as a storage capacitor in energy storage circuits and switched capacitor circuits.

Working Principle
Tantalum capacitors are fundamentally dielectric or electrolytic capacitors that employ tantalum foil as both the electrodes and the dielectric material. The TM3B226M6R3LBA has a capacitance value of approximately 2.6 µF, and is constructed using a high grade tantalum foil and an electrolyte dielectric.When an alternating current is applied to the capacitor, an electric field is generated between the positive and negative plates of the capacitor. This electric field imparts an opposing voltage on the capacitor, and causes a charge to build up on either of the plates. This charge then acts as a storing medium that stores energy until the voltage drops and the stored charge is neutralized.When a direct current is applied to a tantalum capacitor, the electric field is caused by the capacitance of the electrolyte dielectric. The dielectric functions as an insulator, storing the charge on the electrodes and preventing current flow. During a direct current flow, a negative voltage will be applied to the negative plate, which causes the current to flow through the dielectric and generates heat. This heat will also increase the capacitance of the capacitor, which will reduce the output voltage.

Conclusion
The TM3B226M6R3LBA is a type of tantalum capacitor with a capacitance value of approximately 2.6 µF and a low equivalent series resistance. It is widely used in switch mode power supplies, DC-DC converters, noise suppression circuits, storage capacitors and switched capacitor circuits. Its working principle is based on the principle of dielectric or electrolytic capacitors, where an electric field is generated between the positive and negative plates and the dielectric material stores charge until the voltage drops and the charge is neutralized.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description