TMP411EDGKT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Temperature sensors are used in a wide variety of applications. The TMP411EDGKT is a digital output temperature sensor designed specifically for industrial applications. It is able to detect extremely small temperature changes and has high accuracy. Its design emphasizes exceptional temperature range, thermal stability, and low quiescent current.

The TMP411EDGKT is capable of measuring temperatures over a -55°C to +150°C range continuously with accuracy of ±2°C and resolution of 0.0625°C. It is capable of sampling temperatures up to 4x over the required conversion time.

The TMP411EDGKT has a 16-bit parallel ADC interface that can convert the analog signal from the thermistor into digital values. The interface provides an easy-to-use communication interface for getting readings from the sensor and controlling its behaviour. There are two channels for the thermistor: one for the normal temperature and one for the high temperature alarm. The two channels allow for monitoring of the temperature even when it goes above the maximum programmed limit.

The TMP411EDGKT has a power-on reset feature that allows it to start or restart in a predefined state. This feature ensures that when the device is first powered up, it is always in a known state and is not affected by the power-on fluctuations that can sometimes occur in the circuit. Furthermore, it also helps protect against overvoltage and short circuit conditions.

The working principle of the TMP411EDGKT is based on the Wheatstone Bridge. This is a simple circuit configuration that uses four resistors in a bridge formation. When there is no temperature change, the bridge is balanced and the output voltage is zero. When the temperature of one resistor changes, the bridge becomes unbalanced and the output voltage changes. The output voltage is used to measure the temperature change.

The thermistor is connected to the bridge in such a way that when the temperature changes, the resistance of the thermistor changes. This change causes a shift in the bridge balance. The bridge output voltage is proportional to the temperature change. The output voltage is then converted to a digital signal using an ADC. This digital signal is then used by the device to control its behaviour.

The TMP411EDGKT is ideal for use in industrial temperature sensing applications. It is robust and reliable, and has an excellent temperature range, accuracy, and resolution. It can detect extremely small temperature changes and its digital interface makes it easy to use in a variety of applications. The power-on reset feature ensures that the device is always in a known state when first powered up.

The specific data is subject to PDF, and the above content is for reference