TMPG06-43-E3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS or transient voltage suppression diodes are a series of devices that suppress transient voltages and are typically used to protect other semiconductor components from destruction in the event of a transient voltage spike. The TMPG06-43-E3/54 is a high power, glass passivated, unidirectional TVS diode that is designed to provide protection from such transients in automotive, industrial, and consumer electronics applications. This article will explain the application field and working principle of the TMPG06-43-E3/54.

The TMPG06-43-E3/54 has a TVS voltage of 43.0V and a power dissipation of 600 Watts, making it suitable for applications requiring greater power handling capacity than a typical TVS diode. This TVS can provide a clamping voltage that is 20% lower than the specified working voltage. It is rated for operation from -55 °C to +150 °C, and has an ultra-low leakage current of 5nA. This makes the TMPG06-43-E3/54 perfect for applications where a high amount of protection is required in a wide temperature range. In addition, the TMPG06-43-E3/54 is compliant with the JEDEC 1.5kW, 8/20 μs surge waveform standard, making it suitable for use in high surge environments.

The TMPG06-43-E3/54 is used in a wide range of automotive, industrial, and consumer electronic applications. In automotive applications, the TMPG06-43-E3/54 is used to protect electrical components from high transients caused by inductive loads such as motors and other engine control systems. In consumer electronics, the TMPG06-43-E3/54 is used to protect appliances from overvoltage caused by power outages or electrical surges. In industrial applications, it is used to protect electrical equipment from high transient voltages and surges.

The working principle of the TMPG06-43-E3/54 is fairly straightforward. When the voltage across the diode reaches a certain level, known as the breakdown voltage, the diode turns on and starts to conduct the current. This causes a sudden increase in the current through the diode, leading to a voltage drop across the diode. This voltage drop acts to reduce the voltage at the other end of the circuit. This is known as clamping, and the TMPG06-43-E3/54 is designed to provide a 20% reduction in voltage in the event of a transient voltage spike.

The TMPG06-43-E3/54 is a highly reliable and efficient TVS diode that is well-suited for a wide range of automotive, industrial, and consumer electronic applications. It is designed to handle higher power levels than typical TVS diodes, and is rated for use from -55 °C to +150 °C. In addition, it is compliant with the JEDEC 1.5kW, 8/20 μs surge waveform standard, making it suitable for use in high surge environments. Finally, it is designed to provide a 20% reduction in voltage in the event of a transient voltage spike, making it an ideal protection device for electrical components.

The specific data is subject to PDF, and the above content is for reference