TPIC6A259DWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPIC6A259DWR is a logic latch that serves as a switch, which is suitable for digital logic systems. It functions as a modulator which can control the on-off state of a particular circuit by passing a binary digital signal to the chip. This chip is commonly used in applications such as motor control, gates, and data storage devices and can withstand up to 18V of continuous current.

It is a dual latch comprising two independent latch circuits, one in the upper position (U) and one in the lower (L). Each latch can be individually enabled or disabled, so that multiple latches can interact with each other in a system. As the chip enables and disables each latch, their inputs can be independently configured and their outputs will be either high (H) or low (L) depending on the mode.

The TPIC6A259DWR uses two types of control signals for operation. Its first control signal is an enable and disable signal, which is sent to the latch in order to activate it or deactivate it. When the enable signal is sent, the output of the latch will be “N” (no effect), regardless of its current state. When the disable signal is sent, the output of the latch will be “Z” (high impedance). The second control signal is the digital signal that is sent to the chip in order to determine its output. When the digital signal is sent at a logical 0, the output of the latch will be “L” (low), and when it is sent at a logical 1, the output of the latch will be “H” (high).

A TPIC6A259DWR can be used in various applications, including motor control, gates, and data storage devices. When used as a motor controller, it can create an on-off state that can be used to control a motor. When used as a gate, it can detect switches between connected circuits and then control the flow of current. As a data storage device, it can store two bits of data and can be used in memory controllers, display drivers, and general logic systems. Additionally, it is suitable for applications up to 18V, as it can withstand up to 18V of continuous current.

In summary, the TPIC6A259DWR is a dual latch which can be used for a variety of applications, including motor control, gates, and data storage devices. It uses two types of control signals, an enable or disable signal, and a digital signal. When the enable or digital signals are sent, the output of the latch will either be “N” (no effect), “Z” (high impedance), “L” (low), or “H” (high). This chip can withstand up to 18V of continuous current, making it suitable for a range of applications.

The specific data is subject to PDF, and the above content is for reference