TPS3307-18MDREP

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Multi-Voltage Supervisor
Number of Voltages Monitored:	3
Output:	Push-Pull, Totem Pole
Reset:	Active High/Active Low
Reset Timeout:	140 ms Minimum
Voltage - Threshold:	1.68V, 2.93V, Adj
Operating Temperature:	-55°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC
Base Part Number:	TPS3307

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS3307-18MDREP is a type of supervisory circuit that can monitor power supplies for signs of undervoltage or overvoltage events, and also has the ability to provide a system reset when these events occur. It is an integrated device that can be used as a stand-alone monitor or as part of a larger system to provide an extra level of protection.The TPS3307-18MDREP is designed to monitor single- or dual-voltage supplies. It has an input range of +2.5 V to +5.5 V, and can detect DC undervoltage or overvoltage events with a voltage threshold accuracy of ±1%. The device is typically used in applications in which a small system reset time is required, as it has a maximum reset time of 25 ms with a reset delay of up to 200 ms.It also includes a control output for manual reset operation. When a manual reset input is used, the device will initiate a reset pulse at the programmed reset threshold level and will monitor the system until the reset level is met. The output of the TPS3307-18MDREP can be configured to either assert the reset signal actively or tri-state the reset signal when no reset is needed.When used as a system-level supervisor, the TPS3307-18MDREP can provide an additional level of protection to a system by automatically initiating a reset when an over- or undervoltage condition is detected. It can also be used as a stand-alone supervisor, providing protection in cases where a manual reset is not available. In either case, the device will automatically detect and reset the system in the event of an abnormal voltage event.The TPS3307-18MDREP includes an on-chip voltage detector that is powered from the supply being monitored, which eliminates the need for an external reference voltage. The device also includes an adjustable reset threshold level that allows users to set the voltage level at which the reset will be initiated. The reset output is available either to directly drive an external logic reset signal or to an external power-on reset circuit, such as a p-channel MOSFET.As part of a system, the TPS3307-18MDREP can be used to provide an additional layer of protection against undervoltage and overvoltage events. The device can detect both of these events, and can provide a reset to the system when either event is detected, allowing the system to reset itself quickly. Additionally, the adjustable threshold level allows users to customize the reset threshold of the device to the specific application.Overall, the TPS3307-18MDREP is a system supervisor that can monitor single or dual voltage supplies, detect undervoltage and overvoltage events and provide a reset when these events occur. It can be used as part of a larger system, or as a stand-alone supervisor, allowing it to provide an added level of protection against voltage events. It also has an adjustable reset threshold level that allows users to customize the device to their specific application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description