TPS3620-33DGKTG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Supervisors: TPS3620-33DGKTG4 Application Field and Working Principle

The TPS3620-33DGKTG4 is a handy supervisor IC with extraordinary features which makes it unique among all other types of products from the same family. This IC primarily serves as a voltage supervisor and weighs as light as 3 mA. It has a wide range of application field, including consumer electronics and industrial applications. This IC is a highly cost-effective alternative when compared to overvoltage controllers and quad comparator-type IC\'s.

The TPS3620-33DGKTG4 is usually installed on the main power supply rails to ensure that the defined trip point for various devices or systems stay within their specified range. This IC monitors VCC voltage and provides an active-low RESET output when VCC drops bellow the trip point. It is also capable of monitoring the status of the battery low pin that would activate the RESET output if the battery is being removed or becomes too low to provide safe operation of the system.

The TPS3620-33DGKTG4 is made up of two primary components - a voltage supervisor and a programmable watchdog timer. The supervisor monitors the input voltage of the system and will open the RESET pin when the voltage drops below the trip point. On the other hand, the programmable watchdog timer provides a time-out feature which resets the system in case of an unintentional freeze or overload. This integrated circuit is designed to conserve power while providing a high-level reset control.

When compared to other similar products, the TPS3620-33DGKTG4 performs better in terms of power efficiency, smaller size and better reliability. Its low voltage operation and low quiescent current make it an ideal choice for low-power applications. This IC features very low power shutdown capabilities, meaning that when the voltage goes below the trip point, the IC will automatically enter a low-power state to preserve energy.

The working principle of the TPS3620-33DGKTG4 IC is based on a voltage supervisor circuit. This circuit is made up of two primary components - a voltage comparator and an external switch. The comparator is triggered when the voltage drops below the pre-defined trip point and it then turns on the switch, which then results in a RESET output going low and resetting the system. The voltage supervisor circuit also contains certain features, such as an input bias current, gain control and adjustable threshold levels, which can be adjusted in order to meet the needs of specific applications.

The TPS3620-33DGKTG4 IC is used in a wide variety of applications, such as consumer electronics and industrial applications. It is widely used as an over-voltage protection device in consumer electronics, and it is also found in several industrial applications, such as motor control and UPS systems. This IC has become extremely popular because of its high accuracy, cost-effectiveness and power consumption. It is also often used to monitor the status of battery low pins, which can be set to trigger a RESET output if the battery becomes too low or is removed.

In conclusion, the TPS3620-33DGKTG4 is a very popular supervisor IC among consumer electronics and industrial applications. It is used to monitor the voltage levels of a system, provide an active-low RESET when the voltage drops below the trip point, and conserve energy through its shutdown capabilities. It offers a highly accurate, cost-effective and reliable solution for low-power applications.

The specific data is subject to PDF, and the above content is for reference