TPS76527DR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS76527DR is a linear voltage regulator integrated circuit which falls under the PMIC (Power Management IC) category. It features two output channels with adjustable output current. This regulator was designed and released by the Texas Instruments Corporation. It is often used in applications that require two power channels, such as general consumer electronics, and computer motherboards. This chip is capable of providing up to 1.5 Amps of continuous output current from its two channel outputs, and has a typical dropout voltage of 1.2V.

The TPS76527DR voltage regulator features two independent regulator outputs. Both of these outputs can independently be set to a certain voltage. When designing for a two-channel configuration, the two output voltages have to be set to be within a certain range of each other, and this range is dictated by the maximum output current of the chip. If the voltages are too far apart, the chip can be damaged due to high currents.

The regulator also has a reference voltage which is used to monitor the output voltage, and to provide the correct voltage at the output. The reference voltage is set during the design phase, and cannot be adjusted in the end product. When the output voltage is higher than the reference voltage, the regulator will increase the output voltage. On the other hand, if the output voltage is lower than the reference voltage, the regulator will reduce the output voltage.

The TPS76527DR has two protection mechanisms; overtemperature protection and overcurrent protection. The overtemperature protection prevents the chip from overheating due to high temperatures, and disconnects the outputs when the junction temperature exceeds a certain limit. The overcurrent protection keeps the chip from being damaged due to high currents. It will shut down the outputs if an overcurrent is detected, and will resume normal operation when the current falls below a certain limit.

The TPS76527DR voltage regulator is typically used in applications where low power levels and low output voltages are required. It is also suitable for designs that require two independent outputs, and can be used in applications such as consumer electronics, and computer motherboards. This regulator is capable of delivering up to 1.5 Amps of continuous output current, and features two protection mechanisms; overtemperature protection and overcurrent protection.

The specific data is subject to PDF, and the above content is for reference