TS391IQ2T Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TS391IQ2T is a type of linear comparator, a special kind of circuit used to compare two voltages, or the voltage of a single voltage to a reference voltage. This type of circuit is used for a variety of applications, such as in analog-to-digital converters (ADCs), peak detectors, and level shifters. This article will discuss the application fields as well as the basic working principle of the TS391IQ2T.

Application Field

The TS391IQ2T has a wide range of applications, including motor control and automotive applications. For motor control, the TS391IQ2T can be used to detect Hall Effect sensor signals and compare it with the required curves. In automotive applications, the TS391IQ2T can be used to detect engine rpm, wheel speed, and transmission gear position. In addition, it can also be used for a variety of other applications such as temperature, pressure, and level measurement. These are just a few of the many applications of the TS391IQ2T.

Working Principle

The basic working principle of the TS391IQ2T is based on the principle of differential amplifiers. A differential amplifier is an electrical device that amplifies the difference between two electrical signals. In the case of the TS391IQ2T, the differential amplifier is connected to two voltage inputs. One of the inputs is the signal input, while the other is the reference voltage. The output of the differential amplifier is then compared to the voltage at the reference input. If the signal input is greater than the reference input, the output of the differential amplifier is “high”; if the signal input is less than the reference input, the output of the differential amplifier is “low”.

The TS391IQ2T also contains a comparator, which is used to compare the output of the differential amplifier with the set reference voltage. When the output voltage of the differential amplifier is greater than the reference voltage, the comparator will output a “high” signal; when the output voltage of the differential amplifier is less than the reference voltage, the comparator will output a “low” signal.

The TS391IQ2T also contains a hysteresis mechanism. This is used to ensure that, once the output of the differential amplifier has exceeded the reference voltage, it must exceed the reference voltage by a certain amount before the comparator will switch back to a “low” signal.

The TS391IQ2T is a versatile and reliable component that is used in a variety of applications. Its wide range of applications, coupled with its reliable and accurate operation, make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference