TS5A3154DCURG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TS5A3154DCURG4 is an integrated circuit that belongs to the interface category, specifically designed to meet the requirements of analog switches, multiplexers, and demultiplexers. The TS5A3154DCURG4 combines low off-isolation voltage, high on-capacitance, minimized leakage current, and high speed switching all in an ultra-small package.

The TS5A3154DCURG4 can be used in a wide range of applications such as precision video switching, machine vision, amplifier/filter/amplifier (AFA) networks, high speed ADCs and DACs, port expanders, data acquisition systems, and commercial/industrial control systems. It also excels where high frequency gain, stability, low power consumption, and low voltage headroom are important.

Applications

The TS5A3154DCURG4 is ideal for applications requiring fast switching with low on-isolation voltages. It has been particularly useful in analog signal processing and processing applications where precision is critical. It can be used for switching voltages of up to 20V, preventing unwanted voltage being applied to other circuits, while providing good isolation and low “on-capacitance”. It can also be used in port expanders, providing low level signals to multiple devices, or serving as a multiplexer in a video processing system.

The TS5A3154DCURG4 is also applicable in advanced digital-to-analog conversion systems, specifically designed for areas such as digital video and audio interfaces, or where low voltage differential signaling (LVDS) is employed. This multiplexer/demultiplexer has proven to be great for data conversion applications, where it can switch quickly between inputs and outputs, and its small size makes it ideal for space-constrained applications.

Working Principle

The TS5A3154DCURG4 consists of four independent bidirectional channels, configured as switches, multiplexers, or demultiplexers. When acting as a switch, the channel behaves as parallel connected switches with the outputs connected to the inputs, allowing current to flow in both directions. When configured as a multiplexer, the channels are used to connect one of several inputs to a single output. In this case, the device is configured as a 4:1 multiplexer, meaning four different inputs can be selected to be sent to a single output.

When being used as a demultiplexer, the device behaves as the opposite, taking a single input and sending it to one of the four outputs. This allows the single input to control up to four different devices.

The device is controlled by two voltage control signals, SND and SEL. SND is a signal used to take the switch out of high impedance state and select its input. When SND is in a logic low state, the switch closes and routes the signal from the selected input to the output. SEL is a logic signal used to select the appropriate input. This signal is used to select the desired input, and thus the correct signal is routed to the output.

In terms of power requirements, the TS5A3154DCURG4 is specified to operate on a minimum voltage of 2.5V, with a maximum voltage of 5.5V. It also has an operating frequency of up to 200MHz and a maximum quiescent current of 2.5mA. The device is specified for surface mount packaging.

Conclusion

The TS5A3154DCURG4 has a lot of advantages to be taken into consideration when performing analog signal switching. It provides highly precise switching, low on-capacitance and low leakage current, in addition to its ultra-small package size. These properties make it a very attractive solution for a wide range of applications, especially in precision analog signal processing. The device is rated to operate up to 200MHz, with a minimum voltage of 2.5V, making it suitable for a vast array of applications, such as video and audio processing, machine vision, and commercial/industrial control systems, among many others.

The specific data is subject to PDF, and the above content is for reference