TS5A3359DCUR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TS5A3359DCUR is a device commonly used in analog switch, multiplexer, and demultiplexer applications. It is a digital circuit, with a 2-channel analog signal switch, designed to switch analogue signals between two, three and four signals, or between four and eight digital signals. The device supports both manual and automatic switching modes.

The TS5A3359DCUR operates in three states, including on, off and toggle. The on state connects the two or four signals to the inputs, allowing analog signals to pass through the device. The off state disconnects the signals from the inputs, which results in the signals not being passed through. The toggle state allows the signals to switch on and off without connecting and disconnecting.

The device has a voltage rating of 15 V, a power dissipation of 8 mW, and a temperature range of -20°C to +80°C. It is designed with an isolation voltage of 500 Vrms and an impedance of 12-50 Ohms, allowing it to operate in a range of high-voltage applications. Further, it has a maximum on-resistance of 49.2 mohms and a maximum off-resistance of 200 ohms, making it suitable for switching very low-impedance loads.

The TS5A3359DCUR can be used in single-ended, dual-ended, open-drain and pull-up configurations in both digital and analog applications. In analog applications, it is particularly suited for the implementation of sample and hold circuits, as well as multiplexing and demultiplexing, capacitive sensor interface, pulse-width modulation (PWM), I²C level shifting and variable voltage supply switching. In digital applications, it is typically employed as an amplifier, switching transistor, or logic gate.

The operational principle of the TS5A3359DCUR is based on charge transfer technology. The device works by transferring electrical charge from one electrode to the other electrode. This process is enabled by the passing of a voltage difference between two ports of the device, allowing electrical charge to transfer to the second electrode. As a result, the device can pass, switch and isolate analogue signals with a higher degree of accuracy than other transitional devices on the market.

In summary, the TS5A3359DCUR is a digital device with a 2-channel analog switch for use in analog switch, multiplexer, and demultiplexer applications. It has an integrated charge transfer technology which allows it to pass, switch and isolate analogue signals accurately. The device is available in single-ended, dual-ended, open-drain and pull-up configurations, making it suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference