TZM5264C-GS08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor components used to control electrical current flow in a circuit. Zener diodes are a type of diode that allow current to flow in both directions but with a higher, or "reverse," voltage. The TZM5264C-GS08, is a single Zener diode that has been designed and manufactured to serve specific application requirements.

The TZM5264C-GS08 Zener diode has many applications, ranging from signal and power regulation to switching and signal isolation. In power regulation, the device is used to set a reference voltage for a circuit. A more common application is the use of the diode in an AC adapter or charger, where the flow of current is regulated and kept at safe levels.

The working principle of a TZM5264C-GS08 Zener diode is based on the diode\'s basic ability to control the flow of current. When there is a positive voltage applied to the diode, it acts as an open circuit and allows current to flow freely in one direction. When the voltage increases to a certain level, the diode will then act as a closed circuit and block any additional current flow in that direction. Conversely, when a voltage is applied in the opposite direction, the diode will again act as an open circuit and allow current to flow in the opposite direction.

The TZM5264C-GS08 Zener diode has a breakdown voltage of 5.6 volts, which is the voltage at which the diode begins to act as a closed circuit and no longer allows any additional current to flow. At this voltage, the diode becomes a voltage regulator, allowing only a certain amount of current to flow, no matter the amount of voltage applied. The diode\'s reverse voltage is also 5.6 volts, meaning any voltage applied in the opposite direction will cause the diode to act as an open circuit and allow current to flow in the opposite direction.

The TZM5264C-GS08 Zener diode is a device that is designed for use in a wide range of applications. Its ability to control the flow of current makes it ideal for use in power regulation, signal isolation and signal regulation. With its breakdown and reverse voltages of 5.6 volts, the diode is well suited for use in power adapters, chargers, and other applications that require a constant, reliable voltage input.

The specific data is subject to PDF, and the above content is for reference