UC2843ANG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UC2843ANG4 is an integrated circuit with a pulse-width modulated (PWM) switch controller and precision reference. It is a member of the UCx84xA family of precision monolithic switching regulators, widely used in a variety of AC/DC and DC/DC converter applications. In addition to basic voltage regulation and adjustable output voltage, the device also provides stable conversion control, adjustable current limit and thermal shutdown protection. It is designed to provide high performance and reliability at a moderate cost for applications like phones, AC/DC adapters, PC systems, consumer electronics and battery chargers.

This device\'s application field falls under PMIC - Voltage Regulators - DC DC Switching Controllers. It is a high performance device, offering a wide range of functions and features ideal for use in a variety of applications.

The UC2843ANG4 has a few main operating parameters and functions. First, it has an adjustable oscillator with a fixed frequency range of 100 kHz to 500 kHz. This allows the user to optimize the design of the circuit, while still maintaining high efficiency and low ripple. Secondly, it features a peak current limit circuit and low voltage lockout which provide protection against overcurrent and under voltage conditions. Thirdly, the operating temperature range is -40°C to 125°C, making it suitable for a wide range of operating conditions.

The UC2843ANG4 features several features that are beneficial in terms of performance and reliability. It has adjustable undervoltage lockout (UVLO), overcurrent protection (OCP) and short-circuit protection (SCP). It also has an adjustable soft start and an adjustable current limit circuit. The device also has an adjustable dead time, allowing the user to control the switching transition times and optimize efficiency. Finally, the IC has a power good flag indicating when the switching regulator has stabilized.

The working principle of the UC2843ANG4 is based on the pulse width modulation technique. With PWM, the output voltage is adjusted by changing the duty cycle of the pulse. This is done by comparing the reference voltage to a feedback voltage and then using the error to adjust the duty cycle. When the reference voltage is higher than the feedback voltage, the duty cycle is increased, and when it is lower, the duty cycle is decreased.

The device uses a single control loop to achieve precise, reliable conversion control. The main element of the control loop is an internal oscillator which generates a fixed frequency square wave. This square wave is used in the comparator circuit, compared to a reference voltage and then amplified to control the power transistor. The power transistor in turn powers the load, providing the regulated output voltage.

In addition, the UC2843ANG4 feature integrated current limiting and thermal shutdown protection. The current limit circuit monitors the output current and shuts off the power transistor if a preset current limit is exceeded. The thermal protection feature is designed to protect the device from overheating. It monitors the internal temperature of the device and shuts off the power transistor if a preset temperature is exceeded.

The UC2843ANG4 is a highly efficient, reliable and cost-effective integrated circuit for switching power supplies. It has adjustable oscillator frequency, adjustable peak current limit, adjustable soft start/shutdown and adjustable current limit. It also features integrated thermal shutdown protection and power good flag. The device is ideal for applications like phones, AC/DC adapters, PC systems, consumer electronics and battery chargers.

The specific data is subject to PDF, and the above content is for reference