UCC2912PWP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Integrated circuit (IC) technology has opened up a range of possibilities in the power management industry, allowing designers to achieve high performance by integrating a range of functions into a single package. In the area of hot swap controllers, one such leader is the UCC2912PWP dual-channel hot swap controller, which integrates two hot swap control channels into a single device. This article will discuss the application field and working principle of UCC2912PWP.

Application Field

UCC2912PWP is suitable for hot swaps of various types of equipment, such as servers, storage devices, and communications gear. The device reduces the risk of damaging sensitive components from voltage spikes, inrush current, or supply brownouts that may occur when such equipment is hot-swapped. The device provides two independent channels for two hot-swap power supplies. In order to make the system even more reliable, the device also has two overvoltage protection channels.

The UCC2912PWP is designed to streamline the hot-swap process. The device incorporates an overvoltage lockout (OVLO) window to accurately monitor the output voltage of the system. A feedback pin can be used to directly measure the actual output current and make corrective responses if necessary. Additionally, the UCC2912PWP includes an adjustable soft-start feature, which can be configured for each channel to gradually ramp up the voltage, protecting sensitive components from sudden inrush current.

Working Principle

The UCC2912PWP uses positive-going and negative-going signals to control the current supply. The positive control signal is sent to the gate of an N-channel MOSFET which is used to turn the current on, while the negative control signal is sent to the gate of a P-channel MOSFET, turning the current off. This type of MOSFET controlled switching is known as "P-MOSFET based Hot Swap" and it is the preferred method for hot swap controllers, allowing them to have excellent current control.

The UCC2912PWP also features a sense resistor for each channel to accurately measure the output current. The measured current is then compared to a user-configurable current threshold and the appropriate action is taken based on the comparison result. The user can choose between three different current threshold settings (low, medium and high), allowing for more precise and responsive power delivery.

The device also implements an adjustable soft-start feature for each channel. The soft-start feature prevents the system from suddenly being exposed to an inrush of current. The soft-start feature can be configured to start the current supply at a predetermined rate.

Finally, the UCC2912PWP also implements an over-voltage lockout (OVLO) window. When the voltage exceeds the OVLO threshold, the device will shut off the power supply until the voltage returns to an acceptable range. This feature helps protect sensitive components from damage due to overvoltage or brown-out conditions.

Conclusion

The UCC2912PWP dual-channel hot swap controller offers not just reliable, controlled operation, but also newfound flexibility in hot-swapping applications. With its current threshold settings and overvoltage lockout, the UCC2912PWP offers excellent protection against any power supply issues. Additionally, its adjustable soft-start feature prevents sensitive components from sudden, potentially damaging inrush currents. In all, the UCC2912PWP offers an excellent solution for any hot-swap application.

The specific data is subject to PDF, and the above content is for reference