UCC5696PNG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UCC5696PNG4 is a device from the interface-signal terminators family. This device is mostly used for signal conditioning and termination in applications such as data transmission, power supplies and I/O boardlevel protection, to meet the needs of many industries. The UCC5696PNG4 is a special-purpose interface consisting of a low-impedance non-inverting input, a finite-impedance non-inverting output, and a bus termination resistor.

The UCC5696PNG4 works on an open-drain, three-state logic output with an internal pullup resistor providing a logic low output. When inactive, the output logic is high impedance, which allows the output to be used as a pullup or pulldown. The pullup resistor can sink up to 200mA without damaging the device itself, provided that the power supply does not exceed the specified voltage.

The typical applications of the UCC5696PNG4 primarily involve the use of the device to protect against bus contention when multiple devices are communicating on the same bus. The device is also useful when transmitting and receiving different voltages, such as in the case of LVDS signals, or to provide a low on/off input impedance. The device is also well suited to applications such as data transmission, power supplies and I/O board-level protection.

The working principle of the UCC5696PNG4 is based on its a three-state active output circuitry and its pullup resistor for the device’s input. The resistor is of finite impedance, and with this impedance the output is driven to its active high impedance state when the output is deactivated. Its push- pull configuration is used to provide fast switching and high-impedance termination, so that the device can drive loads of up to 200mA without causing damage.

When the device is active, it pulls the voltage on the device’s output high and then sets the voltage on the device’s input to the low logic state of the device. The on/off impedance of the device is determined by the pullup resistor’s value, which can be set to provide a low on/off impedance when transmitting LVDS signals in applications like data transmission. This low impedance can be very useful in a number of applications, as it can reduce the total amount of energy consumed and improve the overall energy efficiency.

The UCC5696PNG4 is a versatile device with applications in many industries. It can be used as a signal terminator, allowing multiple devices to communicate on a single bus without damaging each other due to bus contention. It can also be used as a pullup or pulldown resistor, providing a low on/off input impedance when driving LVDS signals. With its finite impedance output and its internal pullup resistor, the UCC5696PNG4 can be used to maximize efficiency and power consumption in a variety of applications.

The specific data is subject to PDF, and the above content is for reference