UCLAMP0541Z2TKT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UCLAMP0541Z2TKT is a Transient Voltage Suppressor (TVS) diode, which protects sensitive electronic components from damage due to overvoltage transients caused by lightning, electrostatic discharge, or other sources. It is specified to protect both low and high speed applications. This device is ideally suited for fast rising and powerful ESD pulses, which can be up to 40A peak and 4kV. The UCLAMP0541Z2TKT also has a very fast response time of less than 1ns, making it suitable for protection of high speed data lines.

The UCLAMP0541Z2TKT is a bidirectional circuit protection device with a nonlinear voltage-current characteristic. This device has an asymmetrical characteristic, with a lower turn-on voltage when subjected to an increase in voltage (positive direction) and a higher turn-on voltage when subjected to a decrease in voltage (negative direction). In the protected mode, the diode blocks the current flow, preventing damage to the protected device.

The UCLAMP0541Z2TKT is available in both through-hole and surface mount packages. The through hole packaging of the device fits 0.062 inch square boards, and is available with either a 7mil (0.18mm) center-to-center spacing for vertical mounting or 12 mil (0.30mm) center-to-center spacing for horizontal mounting. The surface mount packaging of the device has a lead pitch of 0.6mm and is suitable for both SMT and thru-hole wave soldering. Both package types are RoHS compliant.

The UCLAMP0541Z2TKT can be used in a variety of applications, such as TV, computers, consumer electronics, and various industrial and automotive electronics. This device is designed for ESD protection on two-wire buses and for various parallel port interfaces. It can also be used in industrial control circuits, power supply circuits, and other circuits that require protection from overvoltage transients.

In order to provide reliable protection, the UCLAMP0541Z2TKT must be connected in a proper orientation to the circuit that needs protection. The anode of the diode should be connected to the most positive voltage potential, and the cathode should be connected to the most negative voltage potential. It is also important to keep the leads of the diode as short as possible in order to reduce the inductance of the circuit, which can reduce the dissipation of the device.

The UCLAMP0541Z2TKT is a reliable and efficient way to protect sensitive electronic components from damaging overvoltage transients. Its small form factor and fast response time make it an ideal choice for many different types of applications. The device is available in both through-hole and surface mount packages, and is RoHS compliant.

The specific data is subject to PDF, and the above content is for reference