UCY2C151MHD91TO

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a form of capacitor widely used in electrical and electronic applications. They typically have a cylindrical shape and two terminals, which provide connection to the capacitor\'s two plates. The terminals, on the exterior of the cylinder, are typically made of aluminum or nickel-plated steel. Within the capacitor cylinder is an electrolytic paste, which contains an electrolyte solution and a porous insulating material, usually paper. The positive terminal of the capacitor is an aluminum tube that is surrounded by a porous, dielectric layer, which is also known as the anode. The negative terminal of the capacitor is the aluminum resistor, which acts to dissipate the heat generated by the capacitor.

UCY2C151MHD91TO is a type of aluminum electrolytic capacitor that is commonly used in applications where high-frequency performance is important, such as in radio frequency amplification circuits. The UCY2C151MHD91TO capacitor has a maximum voltage of 150 VDC and is rated for operation over a temperature range of -55°C to +125°C. The operating frequency of the capacitor is up to 1500 kHz with tolerances of 10 to 20%. It is suitable for applications such as filtering, motor start, arc welding, and frequency conversion.

The working principle of aluminum electrolytic capacitors is based on Faraday\'s Law of Capacitance, which states that the capacitance of a capacitor is equal to the product of its surface area and dielectric constant divided by its separation distance. An electrolytic capacitor is constructed of two aluminum plates separated by a porous, insulating material called the electrolytic layer. Under normal conditions, the aluminum plates act as a capacitor, with one plate accumulates a positive charge and the other plate accumulates a negative charge. A dielectric material is sandwiched between the two plates and acts as an insulator, preventing an electrical current from flowing between them.

When an applied voltage is sufficient to overcome the insulating properties of the electrolyte, a current will flow between the two plates and charge the capacitor. The amount of charge stored in the capacitor is determined by the magnitude of the applied voltage and the number of plates. As current flows into the capacitor, the accumulated charge will cause a build-up of a charge on one of the capacitor plates. The charge on the plates will eventually reach a point where it equalizes with the applied voltage on the capacitor. This is known as the capacitance of the capacitor.

Aluminum electrolytic capacitors are widely used in electrical and electronic applications, due to their high capacitance-to-volume ratio, low cost, and high stability. They are commonly used for power-supply filtering, signal coupling and decoupling, motor start-up, and arc welding. Their high stabilizing capacity also makes them suitable for applications in which voltage regulation is important.

The specific data is subject to PDF, and the above content is for reference