UF1BHR1G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A UF1BHR1G is a single-phase full-wave bridge rectifier. It is classified as a diode, which is a two-terminal, unidirectional semiconductor device that can be used to efficiently convert ac (alternating current) to dc (direct current). Rectifiers are used to convert ac energy from a source to dc energy, used in power supplies and other electrical applications. The UF1BHR1G is specifically designed for powering electronic circuits.

The UF1BHR1G has four diodes connected in a bridge configuration. These four diodes form a full-wave rectifier, which rectifies alternating current from the mains step down transformer into a unidirectional form of current, like the dc energy used in electronic circuits. In order for the rectification to occur, the four diodes must switch on and off quickly and accurately. This is achieved by the use of an isolated-gate bipolar transistors (IGBTSs). These transistors are themselves controlled by a voltage controller chip, whose job it is to monitor the rectified output and ensure that the necessary control signals are sent to the I GBTSs.

When the circuit is supplied with alternating current, the voltage controller chip senses the voltage and sends the necessary signals to the IGBTs. The IGBTs open and close the contacts of the four diodes to control the flow of current. This process is known as electrical commutation and allows the rectifier to draw power from the mains and supply the output with a dc voltage. As the IGBTs open and close, the magnetic field collapses, producing a negative spike in the circuit, which any sensitive components must be able to handle in order to be used in the circuit.

A key feature of the UF1BHR1G is its wide input range. As it is operating off the mains supply, it has to be able to operate reliably at different voltages. The wide range also reduces the need to add voltage regulators to the circuit to protect any components from high voltages. The UF1BHR1G can also operate reliably at high temperatures, making it suitable for use in a wide range of applications. In addition, the rectifier has a high efficiency rating, meaning that the input current is not wasted, making it an energy efficient solution.

The UF1BHR1G is designed for use in a wide range of applications such as switch mode power supplies, motor speed control, and electronic ballast for lamp. It is widely used in industrial and automotive applications, due to its wide input range, high temperature capability and high efficiency. The full-wave rectifier is used to convert ac energy from a source and supply the output with a dc voltage. This voltage is then regulated and filtered to create the desired output and avoid any interference.

The UF1BHR1G is a single-phase full-wave bridge rectifier and is classified as a diode. It is used to convert alternating current from the mains step down transformer into a unidirectional form of current, like the dc energy needed in electronic circuits. The rectifier uses four diodes connected in a bridge configuration and controlled by an IGBT driven voltage controller chip, to switch on and off the circuit quickly and accurately. The UF1BHR1G has a wide input range, is highly efficient and has a high temperature capability, which makes it suitable for a range of industrial, automotive and general purpose applications.

The specific data is subject to PDF, and the above content is for reference