UF4004-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are among the oldest and most applied electronic components in the area of electronics. They are made up of an anode and cathode, two terminals that enable the component to carry out rectification. As one of the most widely used types of diode, the UF4004-G is a single rectifier diode suitable for use in many different applications.

The UF4004-G has been especially designed for use in a variety of power supplies and voltage converters. Its construction consists of a ceramic encasing containing a rectifying element. With its capability of handling up to 400 volts of continuous forward current and 60 Amps of intermittent forward current, it has a wide range of possible applications.

The working principle of the UF4004-G diode is rectification. This is the electrical process by which alternating current (AC) is changed into direct current (DC). The diode limits current flow to one direction, allowing the positive and negative cycles of the AC waveform to be differentially filtered, creating a separate DC component. This allows the UF4004-G to be used as a full-wave or bridge rectifier in power supplies, allowing it to convert AC power into DC.

The UF4004-G diode also has applications in the switching of AC applications, allowing the conversion of AC to DC while efficiently cooling the components due to its low thermal resistance. The diode also has many consumer applications in the area of solar power, with its ability to continuously rectify current used in renewable energy applications.

The UF4004-G can also be used as a quenching device, as its fast commutation time allows for it to rapidly switch current directions, providing a clean break for resistive loads. As a protective device, the diode can be used to prevent accidental reverse current from damaging a circuit, acting as a safeguard for circuits.

The UF4004-G diode is a versatile and reliable component that can be used in many different applications. It can be used as either a full-wave or bridge rectifier for voltage converters, as a switching device for AC circuits, for solar power applications, or as a quenching and protective device. Its wide range of applications, its ability to withstand continuous high current, and its low thermal resistance make it a highly suitable component for any type of circuit design.

The specific data is subject to PDF, and the above content is for reference