UFG1J102MHM

Series:	UFG
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	1000µF
Tolerance:	±20%
Voltage - Rated:	63V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	1000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	Audio
Ripple Current @ Low Frequency:	1.4A @ 120Hz
Ripple Current @ High Frequency:	1.61A @ 10kHz
Lead Spacing:	0.295" (7.50mm)
Size / Dimension:	0.709" Dia (18.00mm)
Height - Seated (Max):	1.476" (37.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors UFG1J102MHM Application Field and Working Principle

Aluminum electrolytic capacitors are common electronic components used in a wide variety of electronic circuits. These capacitors use a thin aluminum oxide layer as the dielectric material in between two aluminum electrodes that are separated by a thin membrane. This provides the capacitor with its unique properties, resulting in high capacitance, low leakage current, and high frequency characteristics. The UFG1J102MHM is a popular model of aluminum electrolytic capacitor available in a variety of different sizes for use in a variety of electronic applications. It has a slightly lower capacitance than other models, meaning it does not store as much electrical energy. However, it is still quite useful in many different applications due to its small size and low leakage current. One of the primary applications of the UFG1J102MHM is as a coupling capacitor in high-frequency oscillator and audio amplifier circuits. In these circuits, the capacitor acts as an electrical signal bridge between two components in order to isolate them from each other. This helps reduce the amount of interference and unwanted noise in the signal. Additionally, the capacitor can be used as a bypass capacitor to reduce signal distortion in signal processing applications, such as in audio amplifiers and filters. Another common application of the UFG1J102MHM is as a power supply decoupling capacitor. In power supply circuits, these devices are used to absorb voltage and current surges that can occur due to high-intensity loads or changes in the electrical signal. The capacitance of the UFG1J102MHM helps to reduce the ripple effect of the power supply, providing a stable electrical output.The working principle of an aluminum electrolytic capacitor is based on the effects of an electrolyte, an ionic solution, between two electrodes. When an electrical potential is applied across the two electrodes, ions from the electrolyte are attracted to the electrodes and accumulate at the interface. This creates an electrical field between the two electrodes, which is called capacitance. As the amount of electrolyte increases, the amount of capacitance also increases. In order to achieve the desired level of performance in a circuit, the electrolyte must be able to pass current and store electrical energy, which is why it is important to select a capacitor model with the appropriate levels of capacitance and leakage current for the application. The UFG1J102MHM is a popular model due to its relatively low capacitance and low leakage current. In conclusion, the UFG1J102MHM is a versatile aluminum electrolytic capacitor model used in a variety of applications. It has a slightly lower capacitance than other models, but this makes it ideal for high-frequency oscillator and audio amplifier circuits, where its low leakage current helps reduce interference and unwanted noise. Additionally, its low capacitance makes it a good choice for power supply decoupling capacitor, where it helps to reduce voltage and current surges while providing a stable electrical output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description