UH3B-M3/9AT Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electronic components that allow current to flow through them in one direction. Rectifier diodes are a type of diode that can convert alternating currents into direct currents, or AC to DC. Single rectifier diodes are diodes that provide full-wave or half-wave rectification for low-frequency power supplies and other applications. The UH3B-M3/9AT is a single rectifier diode that has wide applications and is useful in many areas.

The UH3B-M3/9AT is primarily used in high power rectifier applications and can handle high currents of up to 50A and working voltages of 800V. It is also a good choice for power supplies in home appliances and other electronics, automotive and industrial, as well as LED lighting applications. Its ultra-fast and soft-recovery characteristics make it suitable for switching supplies and areal power drive products. Its plastic TO-220F package provides good thermal characteristics and high reliability for over-temperature protection. Its high average forward current capability also makes it suitable for welding inverter applications.

In terms of its working principle, the UH3B-M3/9AT is a three-terminal device that helps regulate the flow of electric current. Its anode is connected to a positive voltage, its cathode is connected to a negative voltage, and its gate terminal is connected to a voltage control terminal. When a positive voltage is applied to the anode and a negative one to the cathode, the diode will allow current to flow in one direction only. This is known as forward biased and the current flow is regulated by adjusting the gate terminal voltage. When the anode voltage is negative compared to the cathode, no current is allowed to flow and this is known as reverse biased.

When used as a rectifier, the UH3B-M3/9AT is connected in a full-wave or a half-wave configuration. In a full-wave rectifier setup, both the positive and negative cycles of an AC power supply are used to effect full-wave rectification. The UH3B-M3/9AT is connected in a bridge rectifier formation, which enables it to rectify both cycles at once. The result is a DC output with a clean waveform. In a half-wave rectifier setup, only one half of the AC cycle is used and the UH3B-M3/9AT is connected in serial mode. This is an efficient way to get DC power since it can be used at higher frequencies, with the trade-off being a less-powerful output.

In conclusion, the UH3B-M3/9AT is a single rectifier diode with wide applications. It is primarily used in high power rectifier applications, as well as power supplies for home appliances and other electronics, automotive, industrial and LED lighting applications. It features ultra-fast and soft-recovery characteristics, making it suitable for switching supplies and areal power drives. Its plastic TO-220F package makes it a reliable choice for over-temperature protection, and it can handle currents of up to 50A and voltages of 800V. It can be used in full-wave or half-wave rectifier configurations, with the full-wave rectifier offering a cleaner DC output than the half-wave rectifier. For these reasons, the UH3B-M3/9AT is an effective and versatile choice for any application that requires a reliable source of DC power.

The specific data is subject to PDF, and the above content is for reference