UH4PCCHM3_A/I

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are the important component of electrical circuitry and the backbone of modern electronics. The rectifier diode is a type of diode that has two terminals, the anode and the cathode, which are designed to allow current to flow only in one direction through the diode. Rectifier diodes can be classified in many different types, including single, dual, and bridge type. UH4PCCHM3_A/I is a single rectifier diode with a maximum current carrying capacity of 1 A and a maximum repetitive peak reverse voltage of 4 V.

The main application of the UH4PCCHM3_A/I diode is to convert an alternating current (AC) to a direct current (DC). AC can be generated by a generator, or it can be supplied by the local power company. However, most electronic devices, like scopes, amplifiers, computer and communication systems, need DC. The UH4PCCHM3_A/I rectifier diode can convert AC to DC supply power to such devices. In addition, it can also be used to create a constant voltage across a load.

The working principle of the UH4PCCHM3_A/I rectifier diode is based on the properties of a p-n junction. When a forward bias voltage is applied to the diode, the electrons in the n-type region move toward the positive terminal and combine with electron holes in the p-type region, creating an electrical current. During the negative half-cycle of the AC signal, the diode is reversed biased and will not conduct, preventing current flow from the main AC power source.

In the UH4PCCHM3_A/I diode, the maximum forward current is limited by the maximum forward current rated for the diode. Exceeding this maximum forward current value could damage the diode. To prevent this, the UH4PCCHM3_A/I diode is usually operated with a suitable current limiting resistor, or with a current limiting circuit, such as a built-in overcurrent protection circuit, in order to keep the current inside the limit. This would also help prevent damage to the diode due to overheating from excessive current.

Losses in the diode are small, but not negligible. These losses are mainly due to the forward voltage drop when current passes through the diode. This voltage drop increases with increasing current. The total power dissipation of the diode is the sum of the forward voltage drop multiplied by the current passing through it, plus any losses due to heat generation caused by its internal resistance.

In short, the UH4PCCHM3_A/I is a single rectifier diode with a maximum current carrying capacity of 1 A and a maximum repetitive peak reverse voltage of 4 V. Its main application is to convert AC to DC, and it is usually operated with a suitable current limiting resistor or circuit. Its total power dissipation is the sum of the forward voltage drop multiplied by the current passing through it, plus any losses due to heat generation caused by its internal resistance.

The specific data is subject to PDF, and the above content is for reference