UKL1J100MED1TD Capacitors

Series:	UKL
Packaging:	Tape & Box (TB)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	10µF
Tolerance:	±20%
Voltage - Rated:	63V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	2000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	75mA @ 120Hz
Ripple Current @ High Frequency:	150mA @ 10kHz
Lead Spacing:	0.098" (2.50mm)
Size / Dimension:	0.248" Dia (6.30mm)
Height - Seated (Max):	0.492" (12.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, also known as electrolytic capacitors, are electronic components used in various electrical circuits to store electrical energy. They are widely used in a variety of electrical and electronic equipment, such as switching power supplies, voltage regulators, radio wiring and other circuits. UKL1J100MED1TD is one of the most commonly used aluminum electrolytic capacitors, which has a wide range of applications and working principles that make it so popular. The UKL1J100MED1TD is a type of electrolytic capacitor that has two terminals: the "+" and the "–". Electrolytic capacitors are polarized, meaning they contain a positive and a negative electrode and they must be connected correctly for them to function properly. This capacitor is rated at 100µF with a maximum voltage of 63V. It is mainly used as a filter capacitor for stabilizing voltage ripple and other current supply problems in power systems. The UKL1J100MED1TD capacitor consists of a solid aluminum casing which is water- and acid-resistant, surrounded by a dielectric, a solid electrolyte, and small lead wires. The casing contains an electrolyte solution which is made up of a metal hydride and electrolyte material dependent on the type of capacitor. The positive terminal of the capacitor is connected with the aluminum casing, while the negative terminal is connected to an external lead wire. The dielectric material is a kind of thin insulating film which is provided with an electrolyte in order to provide an electrical bridge between the two metal plates.When voltage is applied to the capacitor, it acts as a support and supplies excess electrical charge. This charge is stored in the capacitor and can then be drawn off when a higher current is needed. The stored charge prevents the voltage from dropping to an unreasonably low level. In order for the capacitor to store and release charge, an electric field needs to be produced, which is created when the capacitor is connected to a power supply. This electric field causes electrons to move from one plate to the other and, in doing so, creates an electrical charge. This process is known as electrostatic induction and it provides the capacitor with the ability to store charge.The UKL1J100MED1TD capacitor is highly reliable as it has a long life and is capable of withstanding harsh environments. This makes it ideal for use in a wide variety of electronic systems. It is also highly efficient, as it has a low internal resistance so that fewer losses are generated during operation. In addition, due to its small size, it is suitable for use in applications with restricted space.Overall, the UKL1J100MED1TD capacitor is well-suited for electronic devices where a capacitor that can reliably store charge and provide high efficiency is required. Its long service life, low internal resistance, and small size make it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description