UKT1C100MDD1TD Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in various electronics for various applications. The UKT1C100MDD1TD is a type of aluminum electrolytic capacitor, which has specific characteristics and capabilities that makes it suitable for many applications. This article will outline the primary application fields and explain the working principle of the UKT1C100MDD1TD.

The UKT1C100MDD1TD aluminum electrolytic capacitor is primarily used in medium power circuits, particularly those operating at low voltage, due to its very low leakage current. It is also extremely suitable for high frequency applications, as it has excellent high frequency characteristics. This makes it a great choice for use in power supplies, oscillators, and audio power amplifiers, as well as other circuits where excellent high frequency characteristics are required.

In addition to its application in medium power circuits, the UKT1C100MDD1TD is also suitable for use in circuits that require low ESR, such as those with large capacitive loads. It is also very suitable for use in high stability circuits, such as precision measuring instruments and radio frequency circuits, due to its relatively low temperature coefficient of capacitance and stability over temperature and aging. Furthermore, the UKT1C100MDD1TD is also suitable for use in energy saving systems, as it is highly efficient.

The UKT1C100MDD1TD aluminum electrolytic capacitor utilizes an anode made of pure aluminum, etched with an array of tiny holes. This creates a large surface area capable of holding a large electrolyte. This electrolyte is an aqueous solution of boric acid diluted with water, ammonium, and other ions. Between the anode and the enormous electrolyte pool is a cathode made of conductive paper saturated with the same boric acid electrolyte solution as the anode, and a non-conductive separator made of nylon, epoxies, or other non-conductive materials.

When voltage is applied between the anode and cathode, a number of chemical reactions take place. These reactions beget an insulating layer of aluminum oxide on the surface of the anode, which acts as an energy barrier and a dielectric. As such, the anode and cathode become electrically isolated from one another. This state of isolation remains so long as energy is not applied, and upon when energy is reapplied, the oxide layer is reformed.

The oxide layer does have a limited lifespan, however, and when this layer is completely depleted, the capacitor will no longer function, known as the capacitor\'s “life expectancy”. This is typically rated in the form of “The insulation resistance of the capacitor should be greater than 1 x 10^12 ohms after 1000 hours at 105℃”. Therefore, when selecting an aluminum electrolytic capacitor it is important to choose an appropriate capacitor ‘life expectancy’ which meets your particular needs.

In conclusion, the UKT1C100MDD1TD aluminum electrolytic capacitor has excellent characteristics and capabilities, which makes it suitable for a variety of applications. It is primarily used in medium power circuits operating at low voltage and is suitable for high frequency applications, low ESR circuits, circuits that require high stability, and energy saving systems. The capacitor works by utilizing an anode made of pure aluminum, etched with tiny holes, and a cathode made of conductive paper, and a dielectric layer of aluminum oxide is formed between the two components. Therefore, if you need an aluminum electrolytic capacitor suitable for the applications explained above, then the UKT1C100MDD1TD could be a great choice.

The specific data is subject to PDF, and the above content is for reference