UPC2798GR-E1-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Mixers are an important component of any radio-frequency (RF) system, and they are the interface between the RF system and a variety of signal sources. The UPC2798GR-E1-A RF mixer is a low-cost, low-noise mixer that is designed to meet the needs of a wide range of RF applications. In this article, we will discuss the application field and working principle of the UPC2798GR-E1-A RF mixer.

Application Field for UPC2798GR-E1-A

The UPC2798GR-E1-A is a wideband RF mixer suitable for use in a variety of applications, such as radio receiving systems, wireless communication systems, and radio transceivers. It is designed to provide low insertion loss, low noise figure, and good sensitivity.

The UPC2798GR-E1-A RF mixer can be used in the following types of applications:

• Wireless Base Stations
• GSM Networks
• UMTS Networks
• Wireless LANs
• LTE (Long-Term Evolution) Networks
• Radio Amateur Networks
• Navigational Systems
• Broadcast Radio Receivers
• Radar Systems
• Satellite Communications Systems

Working Principle of UPC2798GR-E1-A

The UPC2798GR-E1-A RF mixer is a single-pole double-throw (SPDT) passive device that is designed to convert the input signal from one frequency to another. The frequency of the output signal depends on the frequency of the signal applied to the mixer. It works on the principle of Frequency Translation, where the input signal frequency is mixed with the local oscillator signal to produce an intermediate frequency (IF) signal.

The RF mixer consists of a signal input, local oscillator input, and an IF output. The signal input is connected to the input signal source, while the local oscillator input is connected to the local oscillator signal source. The IF output is connected to the IF amplifier. In operation, the two signals are mixed together in the mixer, resulting in the IF signal being outputted at the IF output.

The UPC2798GR-E1-A uses a switching type of circuit to produce the IF frequency. It is a wideband mixer with a good linearity in its operating frequency range and low noise figure, making it ideal for use in various types of RF systems.

Conclusion

The UPC2798GR-E1-A is a low-cost, low-noise mixer suitable for a wide variety of RF applications. It uses a SPDT circuit to convert the input signal from one frequency to another and is designed to provide good sensitivity and low insertion loss. The mixer works on the principle of frequency translation and is capable of producing a wide range of IF frequencies. It is an ideal choice for use in wireless and broadcast applications.

The specific data is subject to PDF, and the above content is for reference