UPC2748TB-E3-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF amplifiers play a crucial role in signal conditioning in a variety of applications where a signal needs to be amplified for further processing. The UPC2748TB-E3-A is an example of one such RF amplifier. It can be used in applications such as radio receivers, television receivers, medical and industrial sensing, and even in automotive and audio systems.

The UPC2748TB-E3-A is a balanced low noise amplifier with a gain of 24dB and a noise figure of 4.5dB. It is suitable for the amplification of both analog and digital RF signals. It offers a wide dynamic range and has an input and output impedance of 50 ohms. This amplifier uses a high linearity GaAs HBT process which provides a wide dynamic range plus low noise and distortion performance.

The working principle of the UPC2748TB-E3-A is based on the fact that an amplifier is used to increase the strength of a signal. In this case, it amplifies the RF signal (of any type) to a sufficient level suitable for further processing. The amplifier uses a differential amplifier topology consisting of two pairs of complementary field-effect transistors (FETs). Each pair of FETs is connected in parallel to form a push-pull pair and provides for a balanced operation. The input signals are applied to the gates of each pair of FETs separately. The two pairs of FETs act as an impedance bridge, providing a constant current source, which results in an increase in the voltage of the input signal.

In order to optimize the linearity of the amplifier, the UPC2748TB-E3-A uses a balanced topology with an active bias network. The active bias network is implemented using an on-chip current mirror. This ensures that each FET in the amplifier gets the same bias current irrespective of the signal amplitude or the frequency of the input signal. This helps to maintain the linearity of the amplifier even under varying conditions.

The UPC2748TB-E3-A also has numerous features that protect it from electrical over stresses (EOS), and electro-magnetic interference (EMI). These include an overload protection system, which prevents the amplifier from being overloaded, as well as ESD protection and EMI rejection. In addition, the amplifier features an Output Enable feature, which allows the output voltage to be set to 0V when not needed. This reduces power consumption and prevents RF signals from interfering with other components in the system.

The UPC2748TB-E3-A is an ideal choice for applications that require wide dynamic range, low noise, high linearity, power saving and reliability. Its balanced topology and active bias network ensures superior performance in the presence of changing input levels, and its overload protection and EMI protection make it suitable for use in even the most demanding applications. This makes the UPC2748TB-E3-A a perfect choice for any application where power and signal integrity are paramount.

The specific data is subject to PDF, and the above content is for reference