UPC2792TB-E3

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Frequency:	1GHz ~ 1.2GHz
P1dB:	--
Gain:	20dB
Noise Figure:	--
RF Type:	DBS
Voltage - Supply:	5V
Current - Supply:	19mA
Test Frequency:	--
Package / Case:	6-TSSOP, SC-88, SOT-363
Supplier Device Package:	SOT-363

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UPC2792TB-E3 is a RF Amplifier used for communication systems. It is a low noise amplifier that operates in the frequency bands from 950MHz to 2.2GHz, with a gain of 28.2dB input power of 0dBm and an output power of 24.8dBm. The amplifier has an impedance of 50 Ohms and is housed in a 14-pin dual inline package.UPC2792TB-E3 is mainly used in mobile phone base stations and communication relay stations, radar, electronic countermeasures, satellite communication systems and other areas. This amplifier features low noise, high gain and flat frequency response. It also has a very low inter-modulation distortion (IMD).The working principle of the UPC2792TB-E3 is based on the principle of oscillation of an electrical field or a magnetic field. An oscillator is a device that produces an alternating electrical or magnetic field and has the ability to maintain its frequency over time. This type of device is capable of producing an impulse of electrical or magnetic energy that propagates along its axis, producing a forward field and a backward field.The UPC2792TB-E3 has an oscillator circuit which is composed of two independent stages: an amplifier and an oscillator. The amplifier stage amplifies the signal, providing a higher level of gain. The oscillator stage then takes the amplified input signal and modulates it, producing an output signal with a frequency that is an integer multiple of the input signal\'s frequency.In order to increase the efficiency of the UPC2792TB-E3, several types of circuits are used. A power splitter circuit is used to split the input power among the multiple stages. This provides a uniform power level to each stage and thus improving the overall gain of the amplifier. Another circuit used is the RF matching network, which improves stability and provides the desired frequency response.Lastly, the UPC2792TB-E3 uses a bias circuit to regulate the current through each stage and further improve performance. The bias circuit also helps to reduce reflection caused by impedance mismatch between the input and output ports.The UPC2792TB-E3 is a very reliable and efficient RF amplifier that is used in a wide variety of communication systems. By combining its low noise and high gain characteristics with its excellent IMD performance, it is a very effective solution for use in critical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description