Allicdata Part #: | USB2513BT-I/M2-ND |
Manufacturer Part#: |
USB2513BT-I/M2 |
Price: | $ 1.85 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Microchip Technology |
Short Description: | IC HUB CTLR 3PORT USB 2.0 HS 36S |
More Detail: | USB Hub Controller USB 2.0 USB Interface 36-SQFN (... |
DataSheet: | USB2513BT-I/M2 Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 1.67429 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Protocol: | USB |
Function: | Hub Controller |
Interface: | USB |
Standards: | USB 2.0 |
Voltage - Supply: | 3 V ~ 3.6 V |
Current - Supply: | 65mA |
Operating Temperature: | -40°C ~ 85°C |
Package / Case: | 36-VFQFN Exposed Pad |
Supplier Device Package: | 36-SQFN (6x6) |
Base Part Number: | USB2513 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The USB2513BT-I/M2 is a highly scalable, intelligent system control peripheral component interface (SCCP-PCI) bridge chip designed for industrial, communications, and control applications. This device is a programmable 8-pin, 14-pin, 16-pin and 20-pin dual-channel device that integrates two high-performance I/O controllers with a single 800/1000 Mbps USB 2.0 high-speed bus bridge for superior performance. It also provides an integrated, configurable 32-bit Advanced Micro-Controller Bus Architecture (AMBA) bus bridge for compatibility with existing AMBA peripherals and connected devices.
The USB2513BT-I/M2 is capable of simultaneous I/O control, data transfer, and communication on the same bus. It can support up to four independent USB devices, four SPI buses, two SPI flash memory controllers, two UARTs, four CAN buses, one SMBus, one I²C bus, and three GPIOs. It also offers a variety of programmable features, including advanced I/O control, packet concatenation, DMA data transfers, and complex operations. These features enable the USB2513BT-I/M2 to be deployed in a range of applications, from industrial systems, to high-end data loggers, to stand-alone systems.
The USB2513BT-I/M2 is specifically designed to simplify the implementation of I/O controllers. The device includes two programmable I/O controllers with up to twenty-five selectable I/O functions and can directly control or monitor up to four independent USB devices. The I/O controllers can be programmed to provide a wide range of features and capabilities, including direct data manipulation, programmability, complex address translation, built-in interrupts and status flags, digital filtering, and advanced windowing and memory mapping techniques. These features significantly reduce the amount of work required to implement a variety of I/O tasks and can simplify system configuration and maintenance.
In addition to its powerful I/O controllers, the USB2513BT-I/M2 also features a flexible, programmable AMBA bus interface. The AMBA bus can be used to integrate and control external devices, such as LCD controllers, memory controllers, and system timers. The device also includes a powerful and programmable Power-On Reset (POR) controller that allows the system to perform automatic initialization and self-testing. The USB2513BT-I/M2 can be used to control a variety of memory and logic devices, including SPI, UART, and CAN controllers, allowing it to be used in a wide range of industrial, communications, and control applications.
The working principle of the USB2513BT-I/M2 is to provide a basic interface between I/O controllers, connected devices, and the USB bus. The device includes two programmable I/O controllers and a flexible, programmable AMBA bus interface. The USB2513BT-I/M2 integrates the two I/O controllers, the AMBA bus interface, and the USB bus bridge into a single, highly configurable peripheral component interface (SCCP-PCI) bridge chip. With the assistance of the programmable features, the device can be used to simplify I/O manipulation, reduce board complexity, and automate system configuration and maintenance.
The USB2513BT-I/M2 is a versatile, powerful, and highly scalable peripheral component interface (SCCP-PCI) bridge chip that can be used to simplify the implementation of I/O controllers in a wide range of applications. The device is capable of simultaneous I/O control, data transfer, and communication on the same bus, making it an ideal solution for industrial, communications, and control applications. With its high-performance I/O controllers, powerful and programmable Power-On Reset (POR) controller, and multiple configurable USB, AMBA, SPI, UART, CAN, I2C, and GPIO interfaces, the USB2513BT-I/M2 provides a reliable, scalable, and highly flexible platform for system control and integration.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
USB2PMB1# | Maxim Integr... | 37.45 $ | 4 | BOARD MUNICH USB ADAPTER |
USB2PMB2# | Maxim Integr... | 38.78 $ | 12 | BOARD MUNICH USB ADAPTER |
USB2.0-AMB10 | Panasonic In... | 21.81 $ | 1 | CABLE ASSEMBLY PROGRAMMIN... |
USB2.0-AB06 | Panasonic In... | 23.31 $ | 1 | CABLE ASSEMBLY PROGRAMMIN... |
DLP-USB232M-G2 | DLP Design I... | 17.33 $ | 142 | MODULE USB-TO-TTL SRL UAR... |
DLP-USB232R | DLP Design I... | 12.47 $ | 83 | MODULE USB-TO-SRL UART 18... |
DLP-USB245R | DLP Design I... | 12.47 $ | 49 | MODULE USB-TO-PARL FIFO 1... |
USB2RS | 22.87 $ | 11 | USB TO SERIAL (RS232) ADA... | |
DLP-USB232M-G | DLP Design I... | 17.33 $ | 1000 | MODULE USB-TO-TTL SRL UAR... |
DLP-USB245M-G | DLP Design I... | 0.0 $ | 1000 | MODULE USB-TO-TTL PARL FI... |
B078-101-USB2 | Tripp Lite | 79.01 $ | 10 | MODULE INTERFACE USB CAT5... |
USB260-M3/52T | Vishay Semic... | -- | 1500 | DIODE GEN PURP 600V 2A DO... |
PL-USB2-BLASTER | Intel | 155.93 $ | 918 | CABLE PROGRAMMING USBAlte... |
USB260HM3/5BT | Vishay Semic... | 0.15 $ | 1000 | DIODE GEN PURP 600V 2A DO... |
USB260HM3/52T | Vishay Semic... | -- | 1000 | DIODE GEN PURP 600V 2A DO... |
USB28B2034 | Leader Tech ... | 5.59 $ | 1000 | FERRITE 220OHM HINGED 6.4... |
USB28B2034K | Leader Tech ... | 5.59 $ | 1000 | FERRITE 220OHM HINGED 6.4... |
USB28B2034A | Leader Tech ... | 5.94 $ | 1000 | FERRITE 220OHM HINGED 6.4... |
USB28B2034KA | Leader Tech ... | 5.94 $ | 1000 | FERRITE 220OHM HINGED 6.4... |
EFR-DI-USB2-DEVICE-SITE | Xilinx Inc. | 1.4 $ | 1000 | USB 2.0 DEVICE IP CORE |
EF-DI-USB2-DEVICE-SITE | Xilinx Inc. | 9.8 $ | 1000 | SITE LICENSE USB 2.O DEVI... |
IPR-USB2S | Intel | 2.1 $ | 1000 | RENEWAL |
IP-USB2S | Intel | 3.5 $ | 1000 | PRIMARY |
IPR-USB2M | Intel | 7.7 $ | 1000 | RENEWAL |
IP-USB2M | Intel | 10.5 $ | 1000 | PRIMARY |
RF-TO-USB2-RD | Silicon Labs | 0.0 $ | 1000 | RF TO USB EVAL REF DESIGN |
USB260-M3/5BT | Vishay Semic... | 0.13 $ | 1000 | DIODE GEN PURP 600V 2A DO... |
BB-USB2ARC5M | B&B Smar... | 18.41 $ | 998 | USB 2.0 ACTIVE REPEATER C... |
USB2AA050PUHFFR | Amphenol Pcd | 41.33 $ | 1000 | USB A TO USB A 0.5M / 1.6... |
USB2AA100PUHFFR | Amphenol Pcd | 42.67 $ | 1000 | USB A TO USB A 1.0M / 3.2... |
USB2AA150PUHFFR | Amphenol Pcd | 44.0 $ | 1000 | USB A TO USB A 1.5M / 4.9... |
USB2AA250PUHFFR | Amphenol Pcd | 46.68 $ | 1000 | USB A TO USB A 2.5M / 8.2... |
USB2AA300PUHFFR | Amphenol Pcd | 47.99 $ | 1000 | USB A TO USB A 3.0M / 9.8... |
USB2AA350PUHFFR | Amphenol Pcd | 49.33 $ | 1000 | USB A TO USB A 3.5M / 11.... |
USB2AA400PUHFFR | Amphenol Pcd | 50.66 $ | 1000 | USB A TO USB A 4.0M / 13.... |
USB2AA500PUHFFR | Amphenol Pcd | 55.79 $ | 1000 | USB A TO USB A 5.0M / 16.... |
USB2AA600PUHFFR | Amphenol Pcd | 58.58 $ | 1000 | USB A TO USB A 6.0M / 19.... |
USB2AA700PUHFFR | Amphenol Pcd | 61.38 $ | 1000 | USB A TO USB A 7.0M / 22.... |
USB2AA800PUHFFR | Amphenol Pcd | 64.17 $ | 1000 | USB A TO USB A 8.0M / 26.... |
USB2AA900PUHFFR | Amphenol Pcd | 66.95 $ | 1000 | USB A TO USB A 9.0M / 29.... |
IC UART TXRX 128/384 BYTE 16QFNUSB Bridg...
IC CONTROLLER USB 36QFNUSB Hub Controlle...
IC CONTROLLER ETHERNET 48SSOPEthernet Ph...
IC USB PWR CTRLR DUAL 8-SOICUSB Controll...
IC LINK LAYER CONTROLLER 176-BGAIEEE 139...
IC UART DUAL I2C/SPI 32-HVQFNRS232, RS48...