V130LU2P

Varistor Voltage (Typ):	205V
Package / Case:	Disc 7mm
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 85°C (TA)
Capacitance @ Frequency:	180pF @ 1MHz
Number of Circuits:	1
Energy:	11J
Current - Surge:	1.2kA
Varistor Voltage (Max):	225.5V
Series:	LU
Varistor Voltage (Min):	184.5V
Maximum DC Volts:	175V
Maximum AC Volts:	130V
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

V130LU2P Application Field and Working PrincipleThe V130LU2P is a type of Transient Voltage Suppressor (TVS) diode or commonly known as a variable resistor or MOV. It is utilized in applications which require surge protection and provides high speed protection from system voltage transients. The V130LU2P is typically used in a variety of communication devices, industrial equipment, and automotive components. This type of transient voltage surge protector is built for speed and designed with a low hold voltage capability, which allows it to react quickly and accurately to fast changing load transients. The maximum peak pulse power is 130 Watts at a 10 x 1000 μs pulse. The V130LU2P has a working voltage range of up to 54 Volts. Additionally, its peak voltage is 675 Volts while the clamping voltage is 600 Volts. The insertion loss is rated at 0.3 dB when used on 50 ohm lines with +20 dBm signal power levels. The V130LU2P is designed to work in accordance with the IEC 60384-4 variable resistor standard for unidirectional overvoltage protection. Its structure comprises two components; a nano-square electrode and an oxide-free metallizing for increased protection and reliability. The electrode of the V130LU2P is made from stainless steel and its structure is perfectly matched to that of the metallizing in order to create the desired protection. The working principle of the V130LU2P is based on a mechanism that is triggered by the voltage requirements of the system. When the voltage reaches the rated peak of 675 Volts, the nano structure will activate and reduce system current in order to protect both the system and the device being protected. The V130LU2P is designed to provide protection against both temporary and continuous overvoltage situations. Upon reaching the critical voltage threshold, the V130LU2P will activate and switch on the electrical current, resulting in a change in the forward voltage drop. This action creates a surge-absorbing effect resulting in decreased system voltage and current. When the voltage requirement has been attenuated, the current will decrease and the device will switch off, thus completing the cycle. The V130LU2P is an advanced form of transient voltage surge protection and is highly reliable under a range of electrical stress conditions. It is designed with a high power holding capacity and an ultra-fast reaction time which helps to protect delicate electronics in a wide range of environments and configurations. It is an ideal choice for applications which require reliable protection against high power surges and voltage transients.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description