V175LA5CP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressors) and Varistors (Voltage Dependent Resistors, VDRs) are two distinct types of surge protection devices, used to protect electronic components and systems from overvoltage transients. MOVs (Metal Oxide Varistors) are a type of varistor that is mostly used in overvoltage protection applications. The V175LA5CP is a bi-directional medium power MOV with a voltage rating of 175VAC. It is a disc-type MOV with an epoxy-encapsulated low inductance design that helps minimize line ringing. The V175LA5CP can dissipate a maximum 5 joules of energy and can withstand high energy surges that occur during lightning or power utility line disturbances.

MOVs can be used in both AC and DC circuits and are designed to limit transient overvoltages. When a voltage transient occurs, MOVs are designed to reduce the peak instantaneous voltage to a safe level, thereby protecting their connected components from damage. MOVs are non-linear voltage-dependent devices that work by diverting the voltage spike away from the protected components and into a low-impedance path that leads to ground. In other words, MOVs behave as a switch between the supply voltage and ground.

A MOV contains a core of metal grains, such as zinc oxide or silicon dioxide, that are electrically connected together and surrounded by a conductive housing. When exposed to an overvoltage transient such as those caused by power line disturbances, the grains in the core of the MOV are compressed by the electric field. This compression reduces the resistance between the grains, causing the MOV to conduct, thus bypassing the incoming transient voltage to ground. As soon as the transient has dissipated, the MOV returns to its original state and the resistance increases again, thereby removing the path to ground.

The V175LA5CP is mostly used in applications such as distributed power systems, motor controls, home appliances, consumer electronics, and industrial environments. It is commonly installed prior to an overvoltage suppressor, such as a fuse or an overvoltage protection device, to provide an additional layer of overvoltage protection. The V175LA5CP is RoHS compliant and meets UL 1449 4th Edition standards. It typically comes in a disc-shape with a lead spacing of 5.1mm, and is UL approved and TUV compliant.

The V175LA5CP is a medium power MOV designed to limit the magnitude of electrical transients and to protect connected equipment from electrical surges. It is a bi-directional device, meaning it works in both directions. Its low inductance design helps reduce the effect of electrical line ringing, which is a common phenomenon that occurs during power transients. The device is an ideal solution for applications requiring low capacitive coupling leakage, low inductance, and high energy dissipation.

In summary, the V175LA5CP is a bi-directional medium power MOV specifically designed to provide overvoltage protection in distributed power systems, motor controls, home appliances, consumer electronics, and industrial environments. It has a voltage rating of 175VAC and can dissipate up to 5 Joules of energy. The V175LA5CP meets UL 1449 4th edition standards, is RoHS compliant, and has a lead spacing of 5.1mm. Although not suitable for short-duration high-voltage spikes, the V175LA5CP is a reliable and cost-effective solution for suppressing overvoltage transients.

The specific data is subject to PDF, and the above content is for reference