V250LA10CP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A Varistor, also known as a Variable Resistor, is an electrical component which is used to prevent high voltage or current from overloading a single circuit. Varistors are commonly present in many electrical systems, including televisions, computers, audio systems and other electronics, to protect the device from zap damage caused by power surges, spikes, and sudden increases in current. The Varistor is a voltage dependent resistor which has two terminals connected to it and a metal oxide material which acts as its primary component. The most common type of Varistor is the V250LA10CP, which is often used in applications where transient voltage is high, including Discharge Light Batons, Inverters, UPS, and CD/DVD Players.

The V250LA10CP Varistor is a surface mount varistor that is made of a suitable material (metal oxide) that effectively limits transient voltage. It is designed to open when the applied voltage between its two terminals reaches a certain level, thus limiting its output and averting potential damage. Its working principle is based on the nonlinear resistance of the metal oxide material, which changes depending on the applied voltage. For instance, when the voltage is below the threshold, the Varistor behaves as a low resistance and does not limit the current. But when the voltage exceeds the threshold, its resistance drastically increases and limits the current, thus protecting the circuit from overloading. Typically, the threshold voltage is between 10 and 14 volts.

These Varistors are widely used in many electronic applications due to their capability to limit transient voltages and protect the circuit from overloading. Some of the common applications are arc suppression, over-voltage protection, over-temperature protection, differential protection, and radio jamming noise filters. They can also be used in power supplies to prevent over-charging and over-discharging, and in surge protection circuits to protect sensitive electronic devices from power surges.

V250LA10CP Varistors are also used to suppress voltage transients in switching circuits. Their ability to detect small changes in voltage makes them an ideal choice for such applications. They automatically adjust the circuit’s characteristics to maintain the voltage at a desirable level, thus ensuring optimum performance of the circuit. Apart from this, they can also be used in circuit breakers to sense high voltage events and to initiate a switch-off.

The V250LA10CP Varistor is an effective device for controlling transient voltages in electronic circuits. It is capable of limiting transient voltages up to 18 volts without any current-limitting components. Its ability to sense voltage transients makes it ideal for use in protection circuits and it can also be used in various other applications to suppress high voltage events. Its compact size, low cost, and easy installation make it highly popular among many electronic designers and engineers.

The specific data is subject to PDF, and the above content is for reference