Current - Output (Max):	10.42A
Base Part Number:	V300B24T250
Size / Dimension:	2.28" L x 2.20" W x 0.50" H (57.9mm x 55.9mm x 12.7mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	87.5%
Operating Temperature:	-40°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	250W
Series:	MINI
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input (Max):	375V
Voltage - Input (Min):	180V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

V300B24T250B3 Application Field and Working Principle

DC-DC converters are used in a wide variety of applications. In particular, the V300B24T250B3 is designed for use in non-standard electronic systems. It is designed to provide a low-voltage, high-current source of power to enable the operation of components in a variety of industrial, commercial and consumer applications.The operating principle of the V300B24T250B3 is based on a standard "buck" or "boost" converter circuit. In this circuit, an input voltage is converted to a lower output voltage. The converter consists of an input rectifier, an inductor, one or more capacitors, a switching device, and an output rectifier.The input rectifier is used to convert the AC power into DC power. The input rectifier is typically a single-phase full-wave rectifier. The inductor is used to store energy that is released into the output when the switching device is turned on. The capacitors are used to smooth out the output voltage, and to provide the output voltage with a high-frequency ripple. The switching device turns the current flow through the inductor on and off. When the current flow is on, energy is stored in the inductor. When the current flow is off, the energy that is stored in the inductor is released to the output rectifier. The output rectifier is typically an H-bridge rectifier that is used to convert the rectified AC power into DC power.The switching frequency of the V300B24T250B3 can be adjusted, depending on the power requirements of the application. The switching frequency can range from 10 kHz to 500 kHz. The operating duty cycle of the V300B24T250B3 can also be adjusted depending on the power requirements of the application. The maximum duty cycle is typically set at 50%. In addition, the pulse width modulation (PWM) for the V300B24T250B3 can be adjusted depending on the application\'s power requirements. The V300B24T250B3 is designed to provide high-current output under a wide range of operating conditions. It is designed to produce an output current of up to 250 amps, and can operate at voltages ranging from 24 to 300 volts. In addition, the V300B24T250B3 has excellent efficiency at full load conditions due to its high-frequency switching and optimized converter design. The V300B24T250B3 is well suited for use in a variety of industrial, commercial, and consumer applications. It is particularly well suited for use in high-power DC-DC converters, such as those used in electric vehicle and solar inverter applications. In addition, it can be used in a wide range of other applications, including LED lighting, UPS systems, telecom systems, meter-reading, and battery charging applications. In summary, the V300B24T250B3 is a high-power DC-DC converter module designed for use in a variety of applications. It is designed to provide an efficient source of power, and is capable of providing an output current of up to 250 amps. The switching frequency and duty cycle can be adjusted depending on the power requirements of the application. Finally, the V300B24T250B3 is well suited for use in a variety of industrial, commercial, and consumer applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description