Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Varistors, MOVs

Varistors, MOVs, commonly referred to as V56ZS3PX2855, are components that are normally used as surge protectors. They are designed to protect electronics from primary and secondary voltage spikes and transients across the power line. In order to understand their application field and working principle, it is important to have a clear understanding of why they are used and their construction.

Varistors are essentially composed of a semiconductor material which is sandwiched between two metal plates. In a typical V56ZS3PX2855 device, the semiconductor material consists of a zinc oxide-based compound. Due to the semiconductor material used, varistors can act as a voltage dependent resistor when the current is increased above normal values.

V56ZS3PX2855 Application Field

V56ZS3PX2855 devices are commonly used as over-voltage protectors in electrical and electronic circuits. When the circuit is operated under normal conditions, the varistor acts as an open circuit, due to its low resistance. However, as soon as a large voltage spike or transient occurs (due to an increase in current), the varistor begins to conduct and the resistance starts to increase.

This sudden increase in resistance helps to momentarily reduce the current in the circuit which can help to protect the components from any damage that could possibly be caused due to the over-voltage. Varistors are commonly used in consumer electronics, computers, and many other electrical systems.

V56ZS3PX2855 Working Principle

The working principle of a varistor is based on its non-linear behavior. This non-linearity is caused by the semiconductor of which the varistor is composed. As soon as a voltage spike is detected, the non-linear behavior of the semiconductor causes a sudden increase in the resistance of the varistor. This sudden increase in resistance helps to reduce the current and thus, protect the circuit from damage.

The non-linear behavior of the semiconductor material is what makes the V56ZS3PX2855 devices so effective as surge protectors. The higher the applied voltage, the higher the resistance of the varistor thus, helping to protect the circuit from any damage. The V56ZS3PX2855 devices are also typically designed to have a low leakage current in the off-state which further helps to protect the circuit from any damages.

Conclusion

V56ZS3PX2855 devices are highly effective as surge protectors in a variety of electrical and electronic systems. The working principle of a varistor is based on its non-linear behavior and the sudden increase in resistance as soon as a voltage spike is detected. This sudden increase in resistance helps to reduce the current and thus, protect the circuit from any damage. The V56ZS3PX2855 devices are highly recommended for protecting your electronics from any electrical surges.

The specific data is subject to PDF, and the above content is for reference