VDRS14T060TME

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VDRS14T060TME is a type of Transient Voltage Suppressor (TVS) diode, which is commonly used for protecting electronic devices from voltage transients. It is one of the most commonly used TVS diodes for surge protection applications. VDRS14T060TME is classified as a Varistor, which is a two-terminal, non-linear resistance device. It is designed for low voltage protection against voltage transients. The device has a reverse breakdown voltage of 14 volts and a breakdown current rating of 6 amps.

Varistors are voltage dependant resistors that have non-linear current-voltage characteristics. This means that they have a resistance that is dependent on the applied voltage between the two terminals. Varistors have a characteristic voltage-current relationship that makes them suitable for protecting devices from voltage spikes. On different levels of the applied voltage, the resistance of the device changes which allows it to regulate the current flow.

The working principle of a VDRS14T060TME is simple. In normal operation, the device has a very low resistance. When a voltage transient exceeds the breakdown voltage of the device, the resistance of the device increases. This increase in resistance is enough to reduce the current flow, thus limiting the amount of current passing through the device and protecting the connected electronic device from being damaged.

In terms of applications, Varistors are used primarily for surge protection. They can be used for both over voltage and under voltage protection of circuits and devices. They are also used in applications where the normal operation voltage is not consistent, such as in telephone lines. VDRS14T060TME is also suitable for applications where voltage transients need to be protected, such as motor control circuits and data lines.

In summary, VDRS14T060TME is a transient voltage suppressor diode, classified as a Varistor, which is designed for low voltage protection against voltage transients. It has a breakdown voltage of 14 volts and a breakdwon current rating of 6 amps. The device works by increasing its resistance when a voltage transient exceeds its breakdown voltage, thus limiting the current flow and protecting the connected electronic devices. Varistors are suitable for surge protection and are used in applications where the normal operation voltage is not consistent. VDRS14T060TME can be used for both over voltage and under voltage protection of circuits and devices, as well as for motor control circuits and data lines.

The specific data is subject to PDF, and the above content is for reference