VLA542-01R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VLA542-01R is a gate driver integrated circuit commonly used in motor drives, batteries and power systems. It is a type of Power Management Integrated Circuit (PMIC), specifically a part of the Gate Driver category. Gate Drivers are used in power topologies to switch the gate of a power MOSFET (Metal Oxide Semiconductor Field Effect Transistor) or IGBT (Insulated Gate Bipolar Transistor).

Power MOSFETs and IGBTs are electrical power being able to switch load compared to a simple switch. The main purpose of the VLA542-01R is to switch on and off the gate of a power MOSFET or IGBT with a logic signal coming from a controller.

Power switch on and off events vary from fast to slow and the appropriate driving direction of the VLA542-01R is assigned to overcome the excess power the power device. By doing so, the VLA542-01R takes a logic signal from a controller and assigns it to the corresponding direction of the device.

The VLA542-01R has a maximum gate voltage of 60V and a maximum gate current rating of 1.8A. Its power supply voltage is 5V, 20V and 40V. The operating temperature range is between -40°C and 125°C. Its thermal resistance is an impressive 0.6°C/W with an extremely low power dissipation of 1.2mW.

Two significant outputs of the VLA542-01R are ‘NRDY’, a logic output symbolizing the driving status of the Gate Driver, and ‘DLY’ a logic output for correcting the Schmitt Trigger delay time.

The NRDY is a logic output from the VLA542-01R that increases when the required conditions are met. In other words, the output increases when the gate voltage is exceeded. The DLY output is a high speed output from the VLA542-01R. This output can be used to adjust the Schmitt Trigger Delay time for the power MOSFET or IGBT.

The VLA542-01R is used in motor drives, battery systems, power supplies and many other digital motor control applications. The primary purpose is to switch the MOSFET/IGBT gate with a logic signal. It is designed to improve the efficiency of the system and reduce the amount of power dissipated while switching. Due to its compact size, it is able to fit into tight spaces. It also provides protection against surge overvoltages, undervoltages and overcurrents.

The VLA542-01R gate driver is a dependable, reliable and efficient device when used in the right applications. It is an important electronic component for motor drives and power systems as it forms the gateway for the power MOSFET or IGBT.

The specific data is subject to PDF, and the above content is for reference