VM04A5030000G

Wire Gauge or Range - AWG:	12-22 AWG
Insulation Height:	0.587" (14.91mm)
Contact Tail Length:	--
Housing Material:	Thermoplastic
Contact Material:	Copper
Wire Strip Length:	6-7mm
Torque - Screw:	0.4 Nm (3.5 Lb-In)
Screw Size:	M2.5
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating Flange, Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	-40°C ~ 115°C
Color:	Black
Wire Gauge or Range - mm²:	0.34-2.5mm²
Series:	VM
Voltage - UL:	300V
Current - UL:	20A
Current - IEC:	--
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Pressure Clip
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.295" (7.50mm)
Number of Levels:	1
Positions Per Level:	4
Number of Positions:	4
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets are an essential and versatile tool for both manufacturers and manufacturers in the development and manufacture of electronics. They provide reliable connections between power, data and control in situations where cables are not practical. Among them, the VM04A5030000G terminal block is a current-detecting terminal block with a current transformer on its base.The VM04A5030000G terminal block can be used in a number of applications, including AC or DC motor speed control, home appliances, industrial equipment, and power monitoring and control. It is widely used in applications where current needs to be monitored accurately and in a reliable manner.The VM04A5030000G terminal block contains a current transformer that is enclosed in a protective outer covering. This transformer is designed to have a precision current detection of 2 microamps (2 μA). This allows for very accurate current measurements, even at low currents. The external total current range is about 4-20A, and the value range that can be monitored is approximately 3.3mA – 5A.In addition, the VM04A5030000G terminal block also has a number of other features. It is designed for easy installation and maintenance and requires no additional controllers and drivers. It has a wide adjustable voltage range of up to 48V. It also has a higher surge protection up to 6kV. It also has an output voltage range of 4.5-24V with a selectable voltage response time.The working principle of the VM04A5030000G terminal block is simple. It is connected to the power line and the AC voltage undergoes rectification, in which the positive and negative halves of the waveform are separated into two paths. This rectified voltage is then converted into a DC voltage signal by the output amplifier. The DC voltage signal is then used to drive the transistor, which acts as the switch to control the current monitoring part.The current comparison part consists of a set of resistors and a transistor. When a current enters the terminal, the voltage across the resistors is adjusted according to the current running through them. This voltage is then compared to the DC voltage signal, and if it is higher than the voltage signal, the transistor is turned on and the current is measured. The measured current is then sent to the output terminal block, allowing for accurate current measurement.The VM04A5030000G terminal block provides a reliable and accurate current measurement and it is widely used in a number of industries. It is suitable for use in a variety of applications, and is able to provide accurate and reliable current measurements at low current levels.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description