VT2060G-M3/4W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The VT2060G-M3/4W rectifier array is primarily used to bridge AC/DC conversion in power distribution devices. This model number can be applied to various products, including: individual rectifiers, rectifier arrays, and rectifier diodes. It can also be used in other applications, such as voltage regulators, energy converters, and power distribution systems.

The VT2060G-M3/4W rectifier array consists of three elements: two rectifier diodes, one voltage regulator, and two capacitors. It is designed for use in high-power applications, such as hard-switched power supplies and UPS systems.

The two rectifier diodes in the VT2060G-M3/4W rectifier array serve to convert the incoming AC voltage into a DC voltage through a process known as rectification. This process involves passing the AC current through a diode to allow only one direction of current flow. The two rectifier diodes are connected in series in order to divide the incoming AC voltage into two sections, referred to as the positive and negative half-cycles. By passing the current through the two rectifier diodes, the positive half-cycle is allowed to flow, whereas the negative half-cycle is blocked.

The voltage regulator in the VT2060G-M3/4W rectifier array performs the task of regulating the output voltage so that it remains within a specific range. This is achieved by adjusting the output voltage in response to changes in the input voltage. The voltage regulator also serves to filter out unwanted high-frequency signals in the output voltage.

The two capacitors in the VT2060G-M3/4W rectifier array serve to store charge in order to supply current to the load when the rectification process is not able to provide an adequate amount of current. This ensures that the load remains at a consistent voltage level.

In addition to these major components, the VT2060G-M3/4W rectifier array also features several other components, such as no-touch terminals, thermal overload switch, and terminal blocks. These components make it easier to install and maintain the rectifier array.

The VT2060G-M3/4W rectifier array is an ideal choice for applications where AC/DC conversion is required. It is reliable, efficient, and easy to install and maintain. It has a wide range of applications, including UPS systems, hard-switched power supplies, and various other energy conversion systems.

The specific data is subject to PDF, and the above content is for reference