WLG2-145LD3-M1J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap Action, Limit Switches are a type of electromechanical device commonly used in industrial automation, allowing a user to activate or deactivate a switch, thus providing a physical limit or boundary to a process. The WLG2-145LD3-M1J is a single-pole double-throw (SPDT) snap action limit switch, with a maximum current rating of 6 Amps. It is a single button switch with a manual reset and a hold-in contact construction.

The WLG2-145LD3-M1J is composed of a body, actuator, armature and coil assembly. The body is made up of two parts, the base and the cap. The base is designed for a fixed attachment to a mechanical structure, while the cap is designed for electrical connection. The WLG2-145LD3-M1J provides two operating functions, momentary and hold-in, which can be selected by removing or adding a jumper. The momentary setting closes the contact when the actuator is depressed and opens it again when released. The hold-in setting closes the contact when the pushbutton switch is depressed and released, and it stays in place afterward. The adjustable armature assembly provides a range of operating angles from 30 to 120 degrees. The commutation time can vary depending on the operating angle.

The working principle of the WLG2-145LD3-M1J is based on the reed switch, which is a switch that uses a pair of magnetic contacts to open or close an electric circuit. The WLG2-145LD3-M1J has two reed switches that are actuated by the movement of the actuator when the switch is pressed or released. When the switch is pressed, the

The specific data is subject to PDF, and the above content is for reference