WNC1R0FET Resistors |
|
Allicdata Part #: | WNC1R0FETR-ND |
Manufacturer Part#: |
WNC1R0FET |
Price: | $ 0.30 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 1 OHM 2W 1% AXIAL |
More Detail: | 1 Ohms ±1% 2W Through Hole Resistor Axial Non-Indu... |
DataSheet: | WNC1R0FET Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.27531 |
2000 +: | $ 0.26910 |
5000 +: | $ 0.26393 |
10000 +: | $ 0.25772 |
Series: | WN |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 1 Ohms |
Tolerance: | ±1% |
Power (Watts): | 2W |
Composition: | Wirewound |
Features: | Non-Inductive |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -55°C ~ 150°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.180" Dia x 0.449" L (4.57mm x 11.40mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors provide an essential function in electronic circuits, providing accurate and repeatable resistance values that ensure reliable operation of the circuit. WNC1R0FET is a type of through hole resistor that offers significant advantages over traditional through hole resistor components. It offers a higher current handling capacity, improved thermal performance, and better EMI protection.
The WNC1R0FET is a three terminal through hole resistor with an encapsulated configuration. It is composed of two lead plates, which are connected by a soldered joint. The lead plates have various properties designed to increase the overall performance of the resistor. The lead plates are connected to each other via two soldered joints that provide a better level of contact. Additionally, the lead plates are covered with a special coating that increases thermal performance and decreases EMI interference.
The WNC1R0FET is an ideal solution for applications requiring high power tolerances, such as power supplies, motor control circuits, and automotive applications. The higher current handling capacity and improved thermal performance make it ideal for tightly regulated power systems and sensitive electronics. In addition, the improved EMI protection ensures that unwanted interference from other electronic components will not cause disruption to the circuit. Additionally, the through hole configuration makes the WNC1R0FET easier to install compared to surface-mounted resistors.
The WNC1R0FET is a widely used through hole resistor in various commercial and military applications. It is used in many power circuit designs, providing reliable resistive values that are highly accurate and consistent. Additionally, the improved temperature characteristics and EMI protection ensure that the resistor can reliably handle even the most extreme operational conditions. The WNC1R0FET is also used in a variety of communication applications, providing reliable performance in settings where signal clarity is important.
The working principle of the WNC1R0FET is relatively simple. When voltage is applied across the two lead plates, the current will flow through the joint connecting the two plates. The resistance of the resistor is determined by the size of the lead plates and the materials used for the lead plates. As such, the WNC1R0FET can be configured to provide a wide range of resistor values, ranging from a few ohms to several megohms. By changing the size and composition of the lead plates, the resistor can be set to specific values, allowing for a wide range of applications.
In conclusion, the WNC1R0FET is a widely used through hole resistor component that offers reliable performance and improved power tolerances. The improved current handling and temperature characteristics make it ideal for power supply and automotive applications, while the improved EMI protection make it ideal for communication and other sensitive electronics. Additionally, its simple working principle makes it easy to set specific resistor values with a simple adjustment of the lead plate size and material. As such, the WNC1R0FET is an ideal solution for a variety of through hole resistor applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SFC-WNC1 | Panasonic In... | 136.64 $ | 1 | DISCRETE WIRE CONNECTION ... |
WNC100FE | Ohmite | 0.68 $ | 1000 | RES 100 OHM 2W 1% AXIAL10... |
WNC10RFE | Ohmite | 0.68 $ | 1000 | RES 10 OHM 2W 1% AXIAL10 ... |
WNC150FE | Ohmite | 0.68 $ | 1000 | RES 150 OHM 2W 1% AXIAL15... |
WNC15RFE | Ohmite | 0.68 $ | 1000 | RES 15 OHM 2W 1% AXIAL15 ... |
WNC1K0FE | Ohmite | 0.68 $ | 1000 | RES 1K OHM 2W 1% AXIAL1 k... |
WNC1R0FE | Ohmite | 0.68 $ | 1000 | RES 1 OHM 2W 1% AXIAL1 Oh... |
WNC15RFET | Ohmite | 0.3 $ | 1000 | RES 15 OHM 2W 1% AXIAL15 ... |
WNC10RFET | Ohmite | 0.3 $ | 5000 | RES 10 OHM 2W 1% AXIAL10 ... |
WNC1K0FET | Ohmite | 0.3 $ | 1000 | RES 1K OHM 2W 1% AXIAL1 k... |
WNC150FET | Ohmite | 0.3 $ | 1000 | RES 150 OHM 2W 1% AXIAL15... |
WNC1R0FET | Ohmite | 0.3 $ | 1000 | RES 1 OHM 2W 1% AXIAL1 Oh... |
WNC100FET | Ohmite | 0.3 $ | 1000 | RES 100 OHM 2W 1% AXIAL10... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...