XC09-038WNI

RF transceiver modules have been widely adopted in a wide range of applications due to their compact size, low power consumption, and high performance. The XC09-038WNI is one such RF transceiver module, designed for wireless applications in the VHF and UHF frequency bands. This module is ideal for applications such as Remote Surveillance and Control, Data Acquisition, Remote Telemetry, and Robotics.

The XC09-038WNI transceiver module is designed to convert digital radio signals into analog signals and vice versa. The module is powered by a single 3.3V supply and includes an integrated antenna switch, mixer, power amplifier, and frequency synthesizers. The module also features an on-board ancillary processor and memory for performing low-level signal processing and communication tasks.

The module operates in the frequency range of 144-450MHz, with selectable receive and transmit frequencies within this range. This range is divided into 32 different channels, each with a center frequency that can be adjusted from 1MHz to 1.5MHz steps.

The module is very versatile and supports a variety of modulation types, including FM, AM, GMSK, and QAM. The receiver has a typical sensitivity and a noise figure of -98 dBm and 2.5 dB, respectively. The module\'s transmit power can be adjusted from -5 to +23 dBm, with a peak power output of 15W.

In addition to the transceiver module, the XC09-038WNI includes a complete system-on-chip (SoC) solution for a more advanced design. The SoC solution includes a processor, on-board flash memory, SRAM, and external serial interface. The processor is a 32-bit RISC processor and is capable of performing complex tasks such as signal processing and communication. The module also supports an optional on-board external modem, making it ideal for advanced applications.

The XC09-038WNI module is an ideal solution for a wide range of wireless applications. Its high performance, low power consumption, and compact size make it an excellent choice for applications such as remote surveillance and control, data acquisition, remote telemetry, and robotics.