XTR108EA Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The XTR108EA is a precision low power, high-level CMOS voltage output amplifier used in a wide range of applications. It has a wide input voltage range of 0.5 to 4.5V, a relatively high open-loop gain of 11, and a low noise of 3.5µV RMS. The device also features an ultra low power consumption of only 1µA. The XTR108EA is used as a high side amplifier in a variety of applications including adiabatic capacitive sensors, photodetectors, and strain gauges.

The XTR108EA is a high-side amplifier that operates on a single supply voltage. It features a voltage-out differential amplifier with two input terminals, one of which is connected to ground and the other one to the sensor or detector of interest. The inputs detect very small changes in voltage, which is then amplified by the amplifier. The voltage output is then proportional to the input voltage. The XTR108EA has an adjustable gain setting, which allows for fine-tuning of the output signal for a specific application.

The XTR108EA is well-suited for use in current sensing, temperature sensing, optical sensing, and pressure sensing applications. Its relatively low noise and wide input voltage range allow for reliable operation when used in sensitive applications such as medical devices, automotive products, and industrial sensors. In addition, the XTR108EA can be used as a data acquisition amplifier or a low-power programmable logic controller

In current sensing applications, the XTR108EA is used to measure very small changes in current. This is accomplished by connecting a resistor or current transformer, or a current sense amplifier to one of the inputs. The other input is then connected to ground, allowing the amplifier to measure changes in current between the two terminals. For temperature sensing applications, the XTR108EA is used in conjunction with a temperature sensor such as a thermocouple or a resistance temperature detector (RTD) to measure temperature.

In optical sensing applications, the XTR108EA is used to measure the intensity of light and convert this into a voltage output. This is accomplished by connecting the input terminals to a photodiode or a photosensor, which converts light into electricity. The amplifier then amplifies this voltage and produces a voltage output which is proportional to the intensity of the light. Finally, for pressure sensing applications, the XTR108EA is used in conjunction with a pressure sensor such as a piezoelectric pressure transducer, which converts pressure into an electrical signal. The amplifier then amplifies this signal and converts it into a voltage output proportional to the pressure.

The XTR108EA is ideal for use in applications where accurate control of the output voltage and low power consumption are required. Its wide input voltage range and adjustable gain settings allow it to be used in a variety of applications and it has proven to be a reliable and accurate solution in a variety of sensitive applications.

The specific data is subject to PDF, and the above content is for reference