Z0109MARL1G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are semiconductor devices made of silicon material which has three terminal leads, namely gate lead, main terminal 1 and main terminal 2. Z0109MARL1G is one type of TRIAC with applications in switching and phase control.

Z0109MARL1G may be used in applications such as motor switching and AC phase control. It is a tristable semiconductor with two operation modes, forward blocking mode and reverse blocking mode. When the voltage applied across the main terminals and gate leads is increased, the device switches from the reverse blocking mode to the forward blocking mode and the circuit is then in an ‘on’ state. When the voltage across the main terminals and gate leads is decreased, the device switches back to the reverse blocking mode and it is in the ‘off’ state.

In order to use Z0109MARL1G effectively, the applied external conditions must be less than the maximum rated device’s conditions. The maximum approved voltage, power dissipation and junction temperature ratings are all important parameters to consider. Moreover, the temperature of the heat sink should be lower than the device temperature since heat produced by the Z0109MARL1G is conducted to the heat sink.

As a popular application for Z0109MARL1G, a light dimmer circuit can be implemented so as to control the intensity of illumination. Other applications involving switching and controlling of both small and large AC power can also be adapted. The advantages of such a system are its wide load range and wide input voltage range. Additionally, the Z0109MARL1G has good dv/dt and di/dt ratings, making it ideal for high frequency switching applications.

Due to its gate control, the gate voltage of the Z0109MARL1G must be chosen properly when conducting the AC control operations. Usually, radio frequency (RF) circuits or opto-isolation units are used in order to couple the gate voltage. An increasing voltage at the gate will turn on the device whereas a decreasing voltage will turn off the Z0109MARL1G. When the gate current is negative, it aids in off-state breakdown as well as reduce turn on time significantly.

Apart from motor switching and AC phase control, Z0109MARL1G may also be used in other applications such as electrical heating, overvoltage protection, power supplies and motor control. These applications mainly utilize the triggering capability of the device in order to control whichever current. The Z0109MARL1G is also an important component to produce Zener diodes, which are utilised in circuit protection.

In summary, the Z0109MARL1G device is a Thyristors – TRIACs semiconductor device with applications mainly in switching and phase control. It is mainly used in the creation of circuits to control electrical current and it has the advantages of wide load range, wide input voltage range and good dv/dt and di/dt ratings. Various applications can be adapted and the device is also used to produce Zener diodes for circuit protection.

The specific data is subject to PDF, and the above content is for reference