Z0107MA0,412

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A TRIAC, an abbreviation for "Triode for Alternating Current", is a member of the thyristors family, a bidirectional controlled-rectifier type semiconductor. It is typically used to drive motors or other inductive loads and to control AC power in applications such as the light dimmer, speed controls, and the like. The Z0107MA0,412 is a TRIAC made by ZETEX, and this article will provide an overview of its application field and working principle.

Applications:

The Z0107MA0,412 is a general-purpose TRIAC and is suitable for many applications. It can be used for speed control of both DC and AC loads, dimming of lights, and for the control of temperature. It is also used for motor control in a wide range of industrial applications, from simple motor speed control to complex industrial motor control systems. With its high current and low on-state voltage (Von) rating, the Z0107MA0,412 ensures fast switching capabilities, making it ideal for use in automated systems.

Working Principle:

The TRIAC operates as a three-terminal device, with one gate, one MT1 and one MT2 terminal. The gate terminal is used to control the flow of current through the device. The MT1 and MT2 terminals are used to control the current direction. When the gate terminal is triggered, the TRIAC starts to conduct current in the forward direction and vice versa. The TRIAC can be triggered bidirectionally. That is, it can be triggered using either positive or negative gate-to-MT1 voltage.

The Z0107MA0,412 is a two-quadrant device, meaning it can control AC power in both directions. It is a bidirectional device, with the gate terminal in the center and the other two terminals on either side. The TRIAC works by sensing the voltage on the gate terminal relative to the voltage at the MT1 terminal. If the voltage at the gate terminal is lower than the voltage at the MT1 terminal, the TRIAC will start conducting. Once it is triggered, the TRIAC continues to conduct until the current is turned off.

Conclusion:

The Z0107MA0,412 is a general-purpose TRIAC suitable for a wide variety of applications. It is a two-quadrant device and can be used to control AC power in both directions. Its high current and low on-state voltage rating make it ideal for use in automated systems. The TRIAC works by sensing the voltage on the gate terminal relative to the voltage at the MT1 terminal and triggering the device when the gate voltage drops below the MT1 voltage.

The specific data is subject to PDF, and the above content is for reference