Z0103MA 1AA2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

A TRIAC, or Thyristor Theromell Alternate cCurrent, is a device used to control the amount of power flowing through an electrical circuit. It is a three-terminal component that is used in many applications, including in motor control, lighting and heating control, and power conversion. The TRIAC is a four-layer component, with a P-type gate and an opposite N-type gate and two load terminals.The TRIAC has a gate input and two output terminals of equal current in both directions. It is triggered with a small current to the gate input, allowing the flow of current through it - the current is greater as the amount of gate current increases. The TRIAC\'s gate current also determines the current going through the load. Meanwhile, the TRIAC also has an anode and a cathode, which helps shield the gate from stray electrical signals.The TRIAC is a semiconductor device that works in conjunction with a Control Device, like a resistor. It has three power stages: off, on and off. The TRIAC is normally off and only turns on when the control device energizes, or a Voltage Control Signal is applied at the Gate Terminal, turning the TRIC on. When in the on state it will remain on until the current is removed either manually or automatically.The Z0103MA 1AA2 is a TRIAC, a type of thyristor. It is used primarily in motor control applications and can be used to control speed, direction and other motor related functions. It works by being connected to the appropriate power control circuit and then being switched on, allowing current to flow from the control circuit to the load.The Z0103M 1AA2 has a Gate Bias current of 2mA to 4mA and a power rating of 250V AC or 500V DC. It has a peak block current of 100mA and a minimum holding current of 10mA. It has a maximum on-state voltage drop of 2V and is rated for a continuous current of 1A and a peak on-state current of 2A.In terms of applications, the Z0103M1AA2 can be used in any application where a powerful and reliable TRIAC is needed. It can be used in light dimmers, motor speed controllers, AC line security systems, contactors and more.The Z0103M 1AA2 is an ideal solution for motor control applications, as it is highly reliable and efficient. It is a versatile component, being able to handle a wide range of AC and DC currents, and having a low voltage drop while maintaining a high switching frequency. This makes it an ideal choice for applications where speed and reliability are paramount.In conclusion, the Z0103M 1AA2 is a TRIAC, a type of Thyristor, used primarily for controlling the amount of power flowing through an electrical circuit. It is a three-terminal device that is commonly used in many applications, from motor control to lighting and heating control. It is highly reliable and efficient, capable of handling a wide range of AC and DC currents and has a low voltage drop while maintaining a high switching frequency.

The specific data is subject to PDF, and the above content is for reference