ZICM357SP2-1-MW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF transceiver modules refer to modules that contain both radio transmitter and receiver on the same integrated circuit or on two different integrated circuits. These modules enable wireless communication systems to operate using the same circuit board. The ZICM357SP2-1-MW is an example of one such RF transceiver module.

The ZICM357SP2-1-MW is a low-power RF transceiver module designed for short-range applications including wireless data, voice, video, and machine-to machine (M2M) networking. The ZICM357SP2-1-MW has excellent transmitter sensitivity and receiver sensitivity, making it suitable for a wide range of applications. It is designed for applications including cellular basestations, wireless access points, RFID, Bluetooth, Wi-Fi, consumer products, remote controls, metering systems, and medical devices.

The ZICM357SP2-1-MW transceiver module employs a narrow band frequency hopping technique. Its baseband frequency hops between 50 kHz and 263 kHz, allowing it to operate over a wide frequency range of 10 to 560 MHz. The ZICM357SP2-1-MW uses a Spread Spectrum technique to reduce EMI, offer highly reliable operation and ensure minimal interference in crowded environments. It has a transmit power of +10dBm and a transmit data rate of up to 9600 bps.

The ZICM357SP2-1-MW RF transceiver module also includes a digitally controllable gain oscillator (DGO). The DGO is designed to ensure optimal channel matching between the RF front end and the digital baseband processor. The DGO increases or decreases the gain of the receive chain in order to adapt to different channel environments. The DGO also supports a wide range of modulation types: Frequency Modulation (FM), Amplitude Modulation (AM), Binary Phase Shift Keying (BPSK), M-ary Quadrature Amplitude Modulation (QAM), and Minimum Shift Keying (MSK).

In addition, the ZICM357SP2-1-MW RF transceiver module has an integrated low noise amplifier (LNA) that amplifies the received signal before it is passed to the digital baseband processor. The module also has an integrated intermediate frequency (IF) filter and signal combiner that remove out-of-band noise, allowing it to operate effectively in environments with a high level of RF interference. The ZICM357SP2-1-MW has an integrated power detector and RSSI output, that can be used to monitor the received signal strength. It also has an integrated PLL, designed to optimize the phase noise of the RX/TX chain.

The ZICM357SP2-1-MW RF transceiver module is designed to be low-cost and easy to implement. The module is optimized for short-range and battery powered applications, while offering the highest levels of performance and reliability. The ZICM357SP2-1-MW is an ideal solution for any wireless communication system that requires a reliable, low-power transceiver module.

The specific data is subject to PDF, and the above content is for reference