ZICM357SP2-1C-HT-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transceiver Modules have been widely used in a variety of communication fields such as wireless communications, satellites, radio, navigation and defense applications. The ZICM357SP2-1C-HT-R is a highly integrated RF Transceiver Module designed for use in industrial, medical, security and consumer applications. The ZICM357SP2-1C-HT-R offers an ideal solution for RF Transceiver Module designs due to its low cost, small size and high performance. The module has a built-in low noise amplifier, monolithic crystal oscillator and on-chip temperature sensor. The integrated low noise amplifier provides the better receiver sensitivity with low distortion and excellent linearity. The monolithic crystal oscillator provides an accurate clock to the module for reliable data transmission. The temperature sensor enables the module to monitor and adjust the operating temperature of the system. The ZICM357SP2-1C-HT-R is capable of operating in the frequency range from 150 MHz to 960 MHz. It is designed to operate with different types of RF communication systems including GSM, IS-960, LTE and WiMax. The antenna is normally connected to the module using an adapter connector. The module takes advantage of the on-chip low noise amplifier, sensitive receiving mixer and local oscillator to provide the best performance for the reception of digital voice and data signals. The working principle of the ZICM357SP2-1C-HT-R is based on the receive chain and transmit chain. The receive chain consists of the antenna, low noise amplifier, mixer, baseband amplifier, image filter, IF filter and AGC circuitry. The antenna is connected to the low noise amplifier for signal amplification. The mixer then mixes the amplified input signal with the Local Oscillator signal to obtain the intermediate frequency. The signal is then amplified by the baseband amplifier and filtered by the image filter. The IF filter eliminates any unwanted noise in the signal. Finally, the gain of the signal is adjusted by the AGC circuitry. The transmit chain consists of the baseband filter, modulator, IF filter, power amplifier and antenna. The signal is filtered by the baseband filter for noise and distortion reduction. The signal is then modulated by the modulator according to the type of data transmission. The signal is then filtered again by the IF filter. The signal is then amplified by the power amplifier and transmitted through the antenna. The application fields of the ZICM357SP2-1C-HT-R vary depending on the type of communication that it is used for. It can be used in industrial, medical, security and consumer applications. For example, it can be used for the transmission of digital voice and data signals in wireless communications, satellite, radio, navigation and defense applications.In conclusion, the ZICM357SP2-1C-HT-R is an ideal RF Transceiver module to use for digital voice and data transmission due to its low cost, small size and high performance. It has a built-in low noise amplifier, monolithic crystal oscillator and on-chip temperature sensor. The module comprises a receive chain and a transmit chain for robust signal reception and transmission. It can be used in a variety of different applications including industrial, medical, security and consumer applications.

The specific data is subject to PDF, and the above content is for reference