ZL6105ALAFTKR5554

Series:	Digital-DC™
Part Status:	Active
Output Type:	Transistor Driver
Function:	Step-Down
Output Configuration:	Positive
Topology:	Buck
Number of Outputs:	1
Output Phases:	1
Voltage - Supply (Vcc/Vdd):	3 V ~ 5 V
Frequency - Switching:	200kHz ~ 1.4MHz
Duty Cycle (Max):	95%
Synchronous Rectifier:	Yes
Clock Sync:	Yes
Serial Interfaces:	I²C, PMBus, SMBus
Control Features:	Current Limit, Enable, Power Good, Soft Start, Tracking
Operating Temperature:	-40°C ~ 85°C (TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The ZL6105ALAFTKR5554 is a control integrated circuit (IC) designed to regulate voltage output in power management applications. It is an example of a polarity/voltage regulator, commonly referred to as a DC-DC switching controller. These devices are designed to increase the efficiency of a system, while maintaining a low operating voltage and a consistent output power. This article will describe the application fields of the ZL6105ALAFTKR5554, as well as its working principle.

Application Fields

The primary application fields of the ZL6105ALAFTKR5554 are in applications requiring a constant DC power input, such as automotive systems. The device is commonly used for off-line applications, such as switching power supplies, voltage regulation modules, server power supplies, and notebook power supplies. It is also suitable for use in battery management systems, as well as DC to DC converters.The ZL6105ALAFTKR5554 is designed to provide a remarkably low operating voltage, which is key to efficient power conversion. The device features an adjustable output voltage and a low standby current, making it a suitable choice for applications that require a low power consumption. The device also features an undervoltage lockout protection to prevent over-discharge of the supply voltage, allowing it to operate safely in a wide input voltage range.

Working Principle

The ZL6105ALAFTKR5554 uses a voltage mode control architecture, which enables it to regulate both the input voltage and the output voltage while maintaining a constant power level. The device senses the output voltage and adjusts the duty cycle of the power switch to maintain it within a specific range. This is done by monitoring the difference between the input voltage and the output voltage. When the input voltage is higher than the output voltage, the duty cycle of the power switch is increased until the output voltage is equal to the input voltage. Conversely, when the output voltage is higher than the input voltage, the duty cycle is decreased until equilibrium is reached.The ZL6105ALAFTKR5554 features a wide suite of protection features, including an overcurrent shutdown, an overload protection circuit, and a thermal shutdown circuit. These features help ensure that the device is operating safely and efficiently. Furthermore, the device has a built-in intelligent reset circuit that enables the device to recover from short-term faults.

Conclusion

The ZL6105ALAFTKR5554 is an example of a polarity/voltage regulator, commonly referred to as a DC-DC switching controller. It is designed to provide a remarkably low operating voltage and an adjustable output voltage, making it suitable for applications that require a low power consumption. Moreover, it features a variety of protection features to help ensure safe and efficient operation. Finally, it has a built-in intelligent reset circuit that enables it to recover from short-term faults.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description