ZPY18-TAP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single - ZPY18-TAP

A Zener diode, also known as a Zener or breakdown diode, is a special type of diode that, unlike a regular diode, can work in a reverse-biased state. This means that it can still conduct in the opposite direction, even though it has a reverse potential bias. When it reaches a certain reverse voltage, it acts as a reverse-biased diode, and beginning part of the voltage is "clamped" to a specific level.

The ZPY18-TAP is a single Zener diode designed to pass electrical current in both the forward and reverse directions. It is made of a semiconductor PN-junction with the cathode connected to a negative voltage and the anode connected to a positive voltage.

The ZPY18-TAP consists of an N-type semiconductor with a low resistance that forms the core part of the diode, and a P-type semiconductor with a higher resistance in the anode region. The N-type is connected to the negative voltage, whereas the P-type is connected to the positive voltage. Between the two semiconductors, the voltage across the diode is in reverse bias, and is typically expressed as −Vz.

When the reverse bias is less than −Vz, the diode acts as a normal diode, allowing current to flow only in the forward direction. However, when the reverse bias potential is greater than −Vz, the diode will have a breakdown. This is due to a large number of electrons being accelerated in the P-type region, creating a current in the opposite direction to the applied voltage. This process is known as Zener breakdown, and occurs due to the electric field generated at the PN junction between the anode and cathode.

The ZPY18-TAP single Zener diode has a reverse voltage breakdown of 18 volts and a forward voltage of 2 volts. It is available in a variety of package sizes, including SOT-23, SMA, and DO-35. It is also available in a variety of power ratings, ranging from 2 to 20 watts, depending on the exact model.

The ZPY18-TAP Zener diode is commonly used in various applications, including electricity regulation, power management, and rectification. It is used to regulate voltages and provide protection against electrical overshoot and undershoot. It can also be used for voltage clamping to limit the amount of reverse current in a circuit.

In addition, the ZPY18-TAP can be used to detect overvoltage and undervoltage conditions in a circuit. It is also used in electronic circuits to provide reference voltages and as electronic components in tunable RF filters. These devices are also used in switching power supply circuits and motor starters, where they provide protection against overcurrent and overvoltage conditions.

The ZPY18-TAP single Zener diode is a reliable and inexpensive device that is easy to use in a variety of applications. It is a versatile, efficient, and cost-effective choice for protecting circuits from overvoltage and overcurrents. This is especially true for systems where both cost and performance are critical.

The specific data is subject to PDF, and the above content is for reference