how to detect the LED emission tube?
On 2018-10-26 16:31:21 in Memory
The use of multimeter to detect LED luminous platoon is mainly to check whether the LEDs are good ...
The main parameters of LED
On 2018-10-31 11:11:54 in Memory
The main parameters of LED include the maximum working current Im and the maximum reverse voltage Um ...
how to detect the discoloration LEDs?
On 2018-10-26 16:40:18 in Memory
As shown in Figure 5-18,a circuit for detecting a discoloration light emitting diode (LEDs),a multimeter is placed in the RX10k2 block,and the two pin is connected. ...
How to measure the color LED dot matrix display?
On 2018-10-29 15:33:54 in Memory
The color LED dot matrix display is the same as monochrome.You can use short columns or rows of methods to detect,just a little cumbersome operation ...
what is an infrared light emitting diode?
On 2018-10-26 16:45:24 in Memory
determine the order of the arrangement of the pins.The multimeter is placed in the R*1 thousand euro file ...
Structure and characteristics
On 2018-11-01 16:47:41 in Memory
LED digital tube also known as semiconductor digital tube ( Figure 1-1-5 ),it is a number of light-emitting diodes arranged in a fixed pattern and packaged together the most commonly used digital display one of the devices ...
what is an infrared receiver?
On 2018-10-26 16:53:35 in Memory
The infrared receiving tube is a semiconductor device used to receive the infrared light wave generated by the infrared light emitting diode and convert it into electrical signal. ...
How do you measure infrared light emitting diodes?
On 2018-10-26 16:48:19 in Memory
When detecting infrared light emitting diodes,there is a big difference between the pointer type multimeter and the digital multimeter ...
The characteristics of Holzer element
On 2018-11-03 15:08:21 in Memory
The materials used in Holzer devices include germanium,silicon,InSb,InAs,GaAs and so on ...
What is an optical coupler?
On 2018-10-27 10:41:35 in Memory
Optical coupler also known as photoelectric isolator,referred to as optocoupler. Optical couplers use light as a medium to propagate the Telecom number ...
Comparative analysis of LDO linear regulator and DC/DC device
On 2018-11-20 10:33:07 in Memory
LDO is a low dropout linear regulator, compared with the traditional linear regulator. Traditional linear regulators ...
The main parameters of the first,triode
On 2018-11-01 14:25:02 in Memory
The current amplification factor is the current magnification,which is used to indicate the amplifying power of the transistor.According to the working state of the triode ...
the detection of the resistor
On 2018-10-31 10:55:57 in Memory
Will be two pen ( regardless of the positive and negative ) are connected with the two ends of the resistor can be connected to measure the actual resistance value ( in order to improve the measurement accuracy ...
The main characteristic of the diode is Danxian
On 2018-10-30 10:56:52 in Memory
It refers to the maximum positive current allowed to pass through the diode during long-term operation,which is related to PN junction area and external heat dissipation conditions. ...
what is a double base diode (single junction transistor)?
On 2018-10-26 17:09:25 in Memory
Double base diode,also known as single crystal transistor (UJT)is a three terminal semiconductor device with only one PN junction.the circuit symbol,internal structure and equivalent circuit of double base diode. ...
Using integrated passive components in the micro-module SIP
On 2018-11-21 11:20:07 in Memory
Integrated passive devices are nothing new in our industry – they have been around for a long time and are well known. ...