How to detect the BTG thyristor?
On 2018-10-29 15:08:36 in Memory
Judging the electrode to place the multimeter in RX1K2 block,and the red and black stylus rotation to connect a pair of electrodes,when a pair of pins is measured to be low resistance ...
how to detect a dual base diode?
On 2018-10-26 17:10:47 in Memory
discriminant emitter E. When the multimeter is placed in the RX1k2 block and the positive and reverse resistance values between any two electrodes are equal (2~10k2) with two forms ...
What is a bidirectional thyristor?
On 2018-10-29 14:25:17 in Memory
Bidirectional thyristor(TRIAC)is a new type of semiconductor device developed on the basis of one-way thyristor ...
How to measure the color LED dot matrix display?
On 2018-10-29 15:33:54 in Memory
The color LED dot matrix display is the same as monochrome.You can use short columns or rows of methods to detect,just a little cumbersome operation ...
what is a double base diode (single junction transistor)?
On 2018-10-26 17:09:25 in Memory
Double base diode,also known as single crystal transistor (UJT)is a three terminal semiconductor device with only one PN junction.the circuit symbol,internal structure and equivalent circuit of double base diode. ...
what is an infrared receiver?
On 2018-10-26 16:53:35 in Memory
The infrared receiving tube is a semiconductor device used to receive the infrared light wave generated by the infrared light emitting diode and convert it into electrical signal. ...
Headphones and piezoceramic buzzers
On 2018-11-03 15:17:06 in Memory
Headset is also an electro-acoustic conversion device,which is similar in structure to an electric speaker,it is also composed of magnet,voice coil,vibrating diaphragm, etc,but the voice coil of the earphone is mostly fixed ...
The main characteristic of the diode is Danxian
On 2018-10-30 10:56:52 in Memory
It refers to the maximum positive current allowed to pass through the diode during long-term operation,which is related to PN junction area and external heat dissipation conditions. ...
how to detect the discoloration LEDs?
On 2018-10-26 16:40:18 in Memory
As shown in Figure 5-18,a circuit for detecting a discoloration light emitting diode (LEDs),a multimeter is placed in the RX10k2 block,and the two pin is connected. ...
how to detect the LED emission tube?
On 2018-10-26 16:31:21 in Memory
The use of multimeter to detect LED luminous platoon is mainly to check whether the LEDs are good ...
Structure and characteristics
On 2018-11-01 16:47:41 in Memory
LED digital tube also known as semiconductor digital tube ( Figure 1-1-5 ),it is a number of light-emitting diodes arranged in a fixed pattern and packaged together the most commonly used digital display one of the devices ...
what is an infrared light emitting diode?
On 2018-10-26 16:45:24 in Memory
determine the order of the arrangement of the pins.The multimeter is placed in the R*1 thousand euro file ...
how to detect a varactor?
On 2018-10-26 17:08:18 in Memory
Because the positive resistance of the varactor diode is larger,the multimeter is placed in the RX 10k2 block,the red form is connected to the positive pole ...
Diode rectifier filter circuit，Diode half wave rectifier circuit
On 2018-09-12 13:00:54 in Memory
Power plant to send 50 Hz AC, after long-distance transmission, to the user is still 50 Hz AC, it is usually sent to industrial users 380 V three-phase AC, to ordinary civil users 220V single-phase AC. ...
The main parameters of the first,triode
On 2018-11-01 14:25:02 in Memory
The current amplification factor is the current magnification,which is used to indicate the amplifying power of the transistor.According to the working state of the triode ...
how to detect and repair the photoelectric switch?
On 2018-10-27 10:40:06 in Memory
The detection method of the transmitting tube and the receiving tube is as follows. ...
Output Curve of Field Effect Transistor
On 2018-11-23 10:36:28 in Memory
If the internal resistance of the test voltage is also very small, the tube will burst undoubtedly. ...
How do you measure infrared light emitting diodes?
On 2018-10-26 16:48:19 in Memory
When detecting infrared light emitting diodes,there is a big difference between the pointer type multimeter and the digital multimeter ...
The main parameters of LED
On 2018-10-31 11:11:54 in Memory
The main parameters of LED include the maximum working current Im and the maximum reverse voltage Um ...