Comparative analysis of LDO linear regulator and DC/DC device
On 2018-11-20 10:33:07 in Memory
LDO is a low dropout linear regulator, compared with the traditional linear regulator. Traditional linear regulators ...
Using integrated passive components in the micro-module SIP
On 2018-11-21 11:20:07 in Memory
Integrated passive devices are nothing new in our industry – they have been around for a long time and are well known. ...
Output Curve of Field Effect Transistor
On 2018-11-23 10:36:28 in Memory
If the internal resistance of the test voltage is also very small, the tube will burst undoubtedly. ...
the structure,type and detection method of the loudspeaker
On 2018-11-03 15:12:34 in Memory
one The structure of the loudspeaker.The loudspeaker,also known as the horn,is an electro-acoustic conversion device that converts the analog voice telephone number into a sound wave ...
Structure and characteristics
On 2018-11-01 16:47:41 in Memory
LED digital tube also known as semiconductor digital tube ( Figure 1-1-5 ),it is a number of light-emitting diodes arranged in a fixed pattern and packaged together the most commonly used digital display one of the devices ...
The characteristics of Holzer element
On 2018-11-03 15:08:21 in Memory
The materials used in Holzer devices include germanium,silicon,InSb,InAs,GaAs and so on ...
how to detect a varactor?
On 2018-10-26 17:08:18 in Memory
Because the positive resistance of the varactor diode is larger,the multimeter is placed in the RX 10k2 block,the red form is connected to the positive pole ...
How do you choose isolation architectures, circuits, and components in power inverter applications?
On 2018-11-21 10:57:27 in Memory
Both motor and power control inverter designers have the same problem of isolating control and user interface circuits from dangerous power line voltages. ...
how to detect a two-way trigger diode?
On 2018-10-26 17:02:25 in Memory
use the multimeter to place the multimeter in the RX1~RX10kQ gear and measure the positive and reverse resistance of the bidirectional trigger diode ...
what is an infrared light emitting diode?
On 2018-10-26 16:45:24 in Memory
determine the order of the arrangement of the pins.The multimeter is placed in the R*1 thousand euro file ...
The main parameters of the first,triode
On 2018-11-01 14:25:02 in Memory
The current amplification factor is the current magnification,which is used to indicate the amplifying power of the transistor.According to the working state of the triode ...
how to detect a dual base diode?
On 2018-10-26 17:10:47 in Memory
discriminant emitter E. When the multimeter is placed in the RX1k2 block and the positive and reverse resistance values between any two electrodes are equal (2~10k2) with two forms ...
What is a bidirectional thyristor?
On 2018-10-29 14:25:17 in Memory
Bidirectional thyristor(TRIAC)is a new type of semiconductor device developed on the basis of one-way thyristor ...
what is an infrared receiver?
On 2018-10-26 16:53:35 in Memory
The infrared receiving tube is a semiconductor device used to receive the infrared light wave generated by the infrared light emitting diode and convert it into electrical signal. ...
Brief analysis of the principle and function of transmission
On 2018-11-20 10:38:35 in Memory
The transmission is used to change the speed and torque of the engine. It can fix or change the transmission ratio of the output shaft and the input shaft in different stages. It is also called the transmission ...
how to detect a photosensitive transistor?
On 2018-10-27 11:13:49 in Memory
the pin of the pin identifies the pin arrangement of the photosensitive transistor as shown in Figure 6-8,the foot near the pin or the longer one is the emitter E,and the far or shorter foot of the foot is the collector C ...
what is a double base diode (single junction transistor)?
On 2018-10-26 17:09:25 in Memory
Double base diode,also known as single crystal transistor (UJT)is a three terminal semiconductor device with only one PN junction.the circuit symbol,internal structure and equivalent circuit of double base diode. ...
how to detect the discoloration LEDs?
On 2018-10-26 16:40:18 in Memory
As shown in Figure 5-18,a circuit for detecting a discoloration light emitting diode (LEDs),a multimeter is placed in the RX10k2 block,and the two pin is connected. ...
how to detect the LED emission tube?
On 2018-10-26 16:31:21 in Memory
The use of multimeter to detect LED luminous platoon is mainly to check whether the LEDs are good ...
How to detect fast recovery, ultrafast recovery diode?
On 2018-10-26 16:05:55 in Memory
The method of measuring fast recovery and ultrafast recovery diode with multimeter is basically the same as the method of detecting plastic sealed silicon rectifier diode. ...
Headphones and piezoceramic buzzers
On 2018-11-03 15:17:06 in Memory
Headset is also an electro-acoustic conversion device,which is similar in structure to an electric speaker,it is also composed of magnet,voice coil,vibrating diaphragm, etc,but the voice coil of the earphone is mostly fixed ...
How to choose the high-speed CF memory card necessary for the photography industry?
On 2019-08-03 10:43:05 in Memory
This article describes the characteristics of the memory card. ...
Common parameters
On 2018-10-30 11:49:42 in Memory
peak height refers to the peak soldering PCB to eat tin height ( Figure 2-1 1 43 ) ...
How do you measure infrared light emitting diodes?
On 2018-10-26 16:48:19 in Memory
When detecting infrared light emitting diodes,there is a big difference between the pointer type multimeter and the digital multimeter ...
How can Advance innovations improve the efficiency of data center memory?
On 2019-08-03 10:22:37 in Memory
This article describes the characteristics of the memory. ...
Wave soldering technology is a mature electronic assembly process
On 2018-10-30 11:33:30 in Memory
the process is loading plate,coating flux,preheating,wave soldering,hot air knife treatment,cooling and unloading plate ...